IDES Prospector Already have an account? Login Here

IDES

Texin® 3044

Thermoplastic Polyurethane Elastomer (Polyester)

Supplied by Bayer MaterialScience LLC

The technical datasheet with complete property values for Texin® 3044 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Texin 3044 is an aliphatic polyester-based thermoplastic polyurethane; it can be processed by injection molding or extrusion. Texin 3044 resin exhibits better color stability (i.e. yellowing) than aromatic thermoplastic polyurethane resins. Texin 3044 also exhibits improved resistance to hydrolysis, as well as outstanding clarity.

Applications include protective film for coated metal and plastic components. Exposure to UV irradiation can affect the mechanical properties of thermoplastic polyurethane resin. As with any product, use of Texin 3044 resin in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Aliphatic
  • Good Color Stability
  • High Clarity
  • Hydrolysis Resistant
  
Uses 
  • Film
RoHS Compliance 
Processing Method 
  • Blow Molding
  • Extrusion
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Molding Shrinkage
      
Flow: 0.100 in
in/in
 ASTM D955
Across Flow: 0.100 in
in/in
 ASTM D955
Across Flow: 0.100 in
%
 ISO 2577
Flow: 0.100 in
%
 ISO 2577
Mechanical
Nominal Value
Unit
Test Method
Flexural Modulus
     ASTM D790, ISO 178
-- 2
psi
  
-22°F
psi
  
73°F
psi
  
Taber Abrasion Resistance (1000 Cycles, 1000 g, H-18 Wheel)
mg
 ASTM D1044
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress
     ASTM D412, ISO 37
100% Strain
psi
  
300% Strain
psi
  
Tensile Strength (Break)
psi
 ASTM D412, ISO 37
Tensile Elongation (Break)
%
 ASTM D412, ISO 37
Tear Strength
      
-- 3
lbf/in
 ASTM D624
--
lbf/in
 ISO 34-1
Compression Set
     ASTM D395B, ISO 815
73°F, 22.0 hr
%
  
158°F, 22.0 hr
%
  
Bayshore Resilience
%
 ASTM D2632
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
 ASTM D2240, ISO 868
Thermal
Nominal Value
Unit
Test Method
Glass Transition Temperature
°F
 DMA
Vicat Softening Temperature
°F
 ISO 306/50, ASTM D1525 4
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Texin® 3044, Texin 3044, Texin® , Texin, Texin3044, 3044, Thermoplastic Polyurethane Elastomer, Thermoplastic Polyurethane Elastomer (Polyester), Thermoplastic Polyurethane Elastomer Polyester, TPU-Polyester, TPUPolyester, TPU:Polyester, TPU/Polyester, TPU+Polyester, TPU_Polyester, TPU Polyester, Thermoplastic Polyurethane, TPU, Bayer, ThermoplasticPolyurethaneElastomerPolyester, ThermoplasticPolyurethane
Features
Features may also be described by the following terms: High Clarity, Good Color Stability.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Suggested Max Regrind
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Rate
 
  
Back Pressure
psi
  
Screw Speed
rpm
  
Cushion
in
  
Injection Notes
Hold Pressure: 60 to 80% of Injection Pressure
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
25% Strain
3Die C
4Rate A (50°C/h)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.