IDES Prospector Already have an account? Login Here

IDES

Bayflex® 110-35 IMR (18% Mineral)

Polyurethane (Polyether, MDI)

Mineral Filler, 18%

Supplied by Bayer MaterialScience LLC

The technical datasheet with complete property values for Bayflex® 110-35 IMR (18% Mineral) is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
The Bayflex 110-35 IMR system produces a solid urethane elastomer which has a flexural modulus of approximately 33,500 psi* at room temperature. This system is used to provide multiple releases of large reaction injection molding (RIM) parts, such as automotive fascias. The system contains internal mold release (IMR) and is used with milled glass fiber or mineral reinforcements. As with any product, use of the Bayflex 110-35 IMR system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

The Bayflex 110-35 IMR is a formulated RIM system supplied as two liquid components. Component A is a diphenylmethane diisocyanate (MDI) prepolymer, and Component B is a polyether polyol system.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Mineral Filler, 18% Filler by Weight
Uses 
  • Automotive Applications
  • Fascias
  
Forms 
  • Liquid
Processing Method 
  • Reaction Injection Molding (RIM)
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792, ASTM D1622
Molding Shrinkage - Flow
in/in
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Break, 0.150 in)
psi
 ASTM D638
Tensile Elongation (Break, 0.150 in)
%
 ASTM D638
Flexural Modulus
     ASTM D790
-22°F, 0.150 in
psi
  
73°F, 0.150 in
psi
  
149°F, 0.150 in
psi
  
Elastomers
Nominal Value
Unit
Test Method
Tensile Strength (Break, 0.150 in)
psi
 ASTM D412
Tensile Elongation (Break, 0.150 in)
%
 ASTM D412
Tear Strength 2 (0.150 in)
lbf/in
 ASTM D624
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.150 in)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
CLTE - Flow (0.150 in)
in/in/°F
 ASTM D696
Thermoset
Nominal Value
Unit
Test Method
Thermoset Components 3
      
Part A
 
  
Part B
 
  
Shelf Life (90°F)
wk
  
Demold Time
min
  
Additional Information
Nominal Value
Unit
Test Method
Heat Sag - 6 in Overhang 4 (250°F, 0.15 in)
in
 ASTM D3769
Part A
  • Type: Isocyanate
  • Appearance: Colorless to straw yellow
  • Specific Gravity @ 25°C: 1.21
  • Viscosity @25°C: 700 mPa-s
  • Flash Point PMCC: 213 °C

Part B
  • Type: Polyol
  • Appearance: Pale yellow liquid
  • Specific Gravity @ 25°C: 1.1
  • Viscosity @25°C: 1250 mPa-s
  • Flash Point PMCC: 160 °C

Molding Parameters
  • Material Temperature - Component A: 38 °C
  • Material Temperature - Component B: 43 to 49 °C
  • Mold Temperature: 66 °C
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Bayflex® 110-35 IMR, Bayflex 110 35 IMR, Bayflex® 110-35 IMR (18% Mineral), Bayflex 11035 IMR 18 Mineral, Bayflex® , Bayflex, Bayflex11035IMR18Mineral, 11035 IMR, 110, 110-35 IMR, 110 35 IMR, 11035IMR, 110-35 IMR (18% Mineral), 11035 IMR 18 Mineral, 110:35 IMR (18% Mineral), 110:35 IMR, 110/35 IMR (18% Mineral), 110/35 IMR, 110+35 IMR (18% Mineral), 110+35 IMR, 110_35 IMR (18% Mineral), 110_35 IMR, 110 35 IMR (18% Mineral), 11035, 35IMR, IMR18, 18Mineral, 110_35IMR, 11035IMR18Mineral, 110_35 IMR 18 Mineral, 110 35 IMR 18 Mineral, Polyurethane, 110_35IMR18Mineral, Polyurethane (Polyether, MDI), Polyurethane Polyether MDI, PUR-Ether/MDI, PUREtherMDI, PUR-Ether:MDI, PUR-Ether+MDI, PUR-Ether-MDI, PUR-Ether_MDI, PUR-Ether MDI, PUR:Ether/MDI, PUR/Ether/MDI, PUR+Ether/MDI, PUR_Ether/MDI, PUR Ether/MDI, PUR, Bayer, PolyurethanePolyetherMDI, PUREther_MDI, PUREther MDI, PUR_EtherMDI, PUR EtherMDI, 35110
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Notes
1Typical properties: these are not to be construed as specifications.
2Die C
3105 Index
41 hr
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.