IDES Prospector Already have an account? Login Here

IDES

Bayflex® 110-50 (24% Mineral)

Polyurethane (Polyether, MDI)

Mineral Filler, 24%

Supplied by Bayer MaterialScience LLC

The technical datasheet with complete property values for Bayflex® 110-50 (24% Mineral) is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
The Bayflex 110-50 system produces a solid urethane elastomer which has a flexural modulus of approximately 50,000 psi* at room temperature. This system can be used with or without milled glass fiber or mineral reinforcements. The Bayflex 110-50 system is used in applications requiring excellent impact properties such as automobile fascias, agricultural and construction equipment, specialty vehicles and recreational equipment.

As with any product, use of the Bayflex 110-50 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

The Bayflex 110-50 system is a formulated elastomeric reaction injection molding (RIM) system supplied as two liquid components. Component A is a diphenylmethane diisocyanate (MDI) prepolymer. Component B is a polyether polyol system.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Mineral Filler, 24% Filler by Weight
Features 
  • Good Impact Resistance
Uses 
  • Agricultural Applications
  • Automotive Applications
  • Construction Applications
  • Fascias
  
Forms 
  • Liquid
Processing Method 
  • Reaction Injection Molding (RIM)
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792, ASTM D1622
Molding Shrinkage - Flow
in/in
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (0.150 in)
psi
 ASTM D412
Flexural Modulus
     ASTM D790
-22°F, 0.150 in
psi
  
73°F, 0.150 in
psi
  
149°F, 0.150 in
psi
  
Elastomers
Nominal Value
Unit
Test Method
Tensile Strength (Break, 0.150 in)
psi
 ASTM D412
Tensile Elongation (Break, 0.150 in)
%
 ASTM D412
Tear Strength 2 (0.150 in)
lbf/in
 ASTM D624
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.150 in)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
CLTE - Flow (0.150 in)
in/in/°F
 ASTM D696
Thermoset
Nominal Value
Unit
Test Method
Thermoset Components 3
      
Part A
 
  
Part B
 
  
Shelf Life (86°F)
wk
  
Additional Information
Nominal Value
Unit
Test Method
Heat Sag - 4 in Overhang 4 (250°F, 0.15 in)
in
 ASTM D3769
Part A
  • Type: Isocyanate
  • Appearance: Water white to clear, pale yellow liquid
  • Specific Gravity @ 25°C: 1.21
  • Viscosity @25°C: 750 mPa-s
  • Flash Point PMCC: 213 °C

Part B
  • Type: Polyol
  • Appearance: Dark amber viscous liquid
  • Specific Gravity @ 25°C: 1.03
  • Viscosity @25°C: 1300 mPa-s
  • Flash Point PMCC: 174 °C

Molding Parameters
  • Material Temperature: 32 to 38 °C
  • Mold Temperature: 60 to 70 °C
  • Typical Cure Time, 0.125 in: 30 sec
  • Polyol Nucleation - Specific Gravity: 0.70 to 0.75 0
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Bayflex® 110-50, Bayflex 110 50, Bayflex® 110-50 (24% Mineral), Bayflex 11050 24 Mineral, Bayflex® , Bayflex, Bayflex1105024Mineral, 110, 110-50, 110 50, 110-50 (24% Mineral), 11050 24 Mineral, 110:50 (24% Mineral), 110:50, 110/50 (24% Mineral), 110/50, 110+50 (24% Mineral), 110+50, 110_50 (24% Mineral), 110_50, 110 50 (24% Mineral), 11050, 5024, 24Mineral, 1105024Mineral, 110_50 24 Mineral, 110 50 24 Mineral, Polyurethane, 110_5024Mineral, Polyurethane (Polyether, MDI), Polyurethane Polyether MDI, PUR-Ether/MDI, PUREtherMDI, PUR-Ether:MDI, PUR-Ether+MDI, PUR-Ether-MDI, PUR-Ether_MDI, PUR-Ether MDI, PUR:Ether/MDI, PUR/Ether/MDI, PUR+Ether/MDI, PUR_Ether/MDI, PUR Ether/MDI, PUR, Bayer, PolyurethanePolyetherMDI, PUREther_MDI, PUREther MDI, PUR_EtherMDI, PUR EtherMDI, 50110
Features
Features may also be described by the following terms: Good Impact Resistance.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Notes
1Typical properties: these are not to be construed as specifications.
2Die C
3105 Index
41 hr
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.