IDES Prospector Already have an account? Login Here

IDES

Hostalen CRP 100 W blue

High Density Polyethylene

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Hostalen CRP 100 W blue is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Hostalen CRP 100 W blue is a high density polyethylene (HDPE), dark blue coloured similar RAL 5005 with high melt viscosity for extrusion and injection moulding. The product is classified as PE 100 and provides excellent stress crack resistance properties (ESCR) combined with very good long term hydrostatic strength.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • High ESCR (Stress Crack Resist.)
  • High Viscosity
  
Uses 
  • Piping
  • Sheet
  
Appearance 
  • Blue
Processing Method 
  • Extrusion
  • Injection Molding
  • Pipe Extrusion
  • Sheet Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
     ISO 1133
190°C/21.6 kg
g/10 min
  
190°C/5.0 kg
g/10 min
  
FNCT 2 (176°F)
month
 ISO 16770
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus - Secant (73°F)
psi
 ISO 527-2/1
Tensile Stress (Yield, 73°F)
psi
 ISO 527-2/50
Tensile Strain (Yield, 73°F)
%
 ISO 527-2/50
Flexural Strength (3.5% Strain)
psi
 ISO 178
Flexural Creep Modulus 3
     ISO 6602
1 hr
psi
  
1000 hr
psi
  
Flexural Creep Modulus
     DIN 19537-2
-- 4
psi
  
-- 5
psi
  
-- 6
psi
  
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, 3 sec)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/B50
Oxidation Induction Time (410°F)
min
 ISO 11357-6
Additional Information
Nominal Value
Unit
Test Method
MRS Classification
psi
 ISO TR 9080
Odor Threshold
 
 EN 1622/EN 1240
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Hostalen CRP 100 W blue, Hostalen , HostalenCRP100Wblue, CRP 100 W blue, CRP100, 100W, Wblue, CRP100Wblue, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, LyondellBasell, PolyethyleneHighDensity, 100CRP
Features
Features may also be described by the following terms: High Viscosity, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant.
Uses
Uses may also be described by the following terms: Piping, Pipe.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
24.0 MPa, 2% Arkopal N 100
32.0 MPa Test Stress
44 point loading, 24 hr
54 point loading, 1 min
64 point loading, 2000 hr
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.