IDES Prospector Already have an account? Login Here

IDES

Clearflex® CH D0

Linear Low Density Polyethylene

Supplied by Polimeri Europa

The technical datasheet with complete property values for Clearflex® CH D0 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Clearflex® CH D0 is a linear low density polyethylene, with antioxidants, characterised by a very low density (VLDPE).

The resin has a high stretchability and an optimum cling effect.

Clearflex® CH D0 is recommended for applications in which soft touch and flexibility are required, for improvement of impact resistance when used as an additive in blend with other polyolefins formulated with or without mineral fillers.

Clearflex® CH D0 is also used as cling agent in stretch film.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Food Contact Acceptable
  • Good Flexibility
  • Good Stretchability
  • High Cling
  • Low Density
  • Soft
Uses 
  • Compounding
  • Film
  • Stretch Wrap
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Compounding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction (vs. Itself - Dynamic, Cast Film)
 
 ISO 8295
Films
Nominal Value
Unit
Test Method
Film Thickness - Recommended / Available
 
  
Tensile Modulus
     ISO 527-3
1% Secant, MD: Cast Film
psi
  
1% Secant, TD: Cast Film
psi
  
Tensile Stress
     ISO 527-3
MD: Yield, Cast Film
psi
  
TD: Yield, Cast Film
psi
  
MD: Break, Cast Film
psi
  
TD: Break, Cast Film
psi
  
Tensile Elongation
     ISO 527-3
MD: Break, Cast Film
%
  
TD: Break, Cast Film
%
  
Dart Drop Impact 2 (Cast Film)
g
 ISO 7765-1
Elmendorf Tear Strength 3
     ISO 6383-2
MD
lbf/in
  
TD
lbf/in
  
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ISO 306/A
Melting Temperature
°F
 Internal Method
Optical
Nominal Value
Unit
Test Method
Gloss (45°, Cast Film)
 
 ASTM D2457
Haze (Cast Film)
%
 ISO 14782
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Clearflex® CH D0, Clearflex CH D0, Clearflex® , Clearflex, ClearflexCHD0, CH D 0, CH D0, CHD, D0, CHD0, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Polimeri Europa, PolyethyleneLinearLowDensity, DCH
Features
Features may also be described by the following terms: High Cling, Low Density, Low Specific Gravity, Good Stretchability, Good Flexibility, Flexible.
Uses
Uses may also be described by the following terms: Compounding, Compounds, Stretch Wrap.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1).
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2F50
3Cast Film
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.