Laramid G/60 Lati Polyphthalamide (Glass Fiber Reinforcement, 60%)

Product Description

Compound based on Semi-aromatic polyammide.
Glass fibres.
Very good thermal properties. Good chemical resistance. Low moisture absorption.

General

Material Status

Availability

Filler / Reinforcement

Features

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Molding Shrinkage²			ISO 294-4
Across Flow: 0.0787 in		%
Flow: 0.0787 in		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus			ISO 527-2/1
73°F		psi
140°F		psi
194°F		psi
248°F		psi
302°F		psi
Tensile Stress			ISO 527-2/5
Break, 73°F		psi
Break, 140°F		psi
Break, 194°F		psi
Break, 248°F		psi
Break, 302°F		psi
Tensile Strain			ISO 527-2/5
Break, 73°F		%
Break, 140°F		%
Break, 194°F		%
Break, 248°F		%
Break, 302°F		%
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength		ft·lb/in²	ISO 179
Charpy Unnotched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eU
Notched Izod Impact (73°F)		ft·lb/in	ASTM D256A
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Vicat Softening Temperature		°F	ISO 306/B50
CLTE - Flow (86 to 212°F)		in/in/°F	ASTM D696
Continuous Use Temperature³		°F
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0295 in
0.0591 in
0.118 in
Glow Wire Flammability Index			IEC 60695-2-12
0.0394 in		°F
0.0787 in		°F
Oxygen Index		%	ASTM D2863
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Laramid G/60, Laramid G60, Laramid , LaramidG60, G/60, G60, G:60, G+60, G-60, G_60, G 60, Polyphthalamide, PPA, Polyamide, Nylon, Lati, 60G
Features
Features may also be described by the following terms: Good Chemical Resistance, Chemical Resistant, Low Moisture Absorption, Low Water Absorption, Water Resistant, Moisture Resistant.

Notes

¹Typical properties: these are not to be construed as specifications.

²at 60 MPa of cavity pressure

³20000 hr

Laramid G/60