IDES Prospector Already have an account? Login Here

IDES

Laticonther 62 CEG/500-V0HF1

Polyamide 6

Glass\Mineral

Supplied by LATI S.p.A.

The technical datasheet with complete property values for Laticonther 62 CEG/500-V0HF1 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
High thermal conductivity product based on Polyamide 6 (PA 6).
Mineral filler / Glass fibres. UL94 V-0 classified, halogens and red phosphorous free.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Filler / Reinforcement 
  • Glass\Mineral
Features 
  • Halogen Free
  • Low (to None) Phosphorus Content
  • Thermally Conductive
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Molding Shrinkage 2
     ISO 294-4
Across Flow: 0.0787 in
%
  
Flow: 0.0787 in
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
     ISO 527-2/1
73°F
psi
  
140°F
psi
  
194°F
psi
  
248°F
psi
  
302°F
psi
  
Tensile Stress
     ISO 527-2/5
Break, 73°F
psi
  
Break, 140°F
psi
  
Break, 194°F
psi
  
Break, 248°F
psi
  
Break, 302°F
psi
  
Tensile Strain
     ISO 527-2/5
Break, 73°F
%
  
Break, 140°F
%
  
Break, 194°F
%
  
Break, 248°F
%
  
Break, 302°F
%
  
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-4°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-4°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256A
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
CLTE - Flow (86 to 212°F)
in/in/°F
 ASTM D696
Thermal Conductivity
Btu·in/hr/ft²/°F
 ASTM E1952-01
Continuous Use Temperature 3
°F
  
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0295 in
 
  
0.0591 in
 
  
0.118 in
 
  
Glow Wire Flammability Index
     IEC 60695-2-12
0.0394 in
°F
  
0.0787 in
°F
  
Glow Wire Ignition Temperature (0.0394 in)
°F
 IEC 60695-2-13
Oxygen Index
%
 ASTM D2863
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Laticonther 62 CEG/500-V0HF1, Laticonther 62 CEG500V0HF1, Laticonther , Laticonther62CEG500V0HF1, 62 CEG, 62 CEG 500 V 0 HF 1, 62 CEG/500-V0HF1, 62 CEG500V0HF1, 62 CEG:500-V0HF1, 62 CEG+500-V0HF1, 62 CEG-500-V0HF1, 62 CEG_500-V0HF1, 62 CEG 500-V0HF1, 62 CEG/500:V0HF1, 62 CEG/500/V0HF1, 62 CEG/500+V0HF1, 62 CEG/500_V0HF1, 62 CEG/500 V0HF1, 62CEG, CEG500, 500V, V0, 0HF, HF1, 62CEG500V0HF1, 62 CEG_500V0HF1, 62 CEG 500V0HF1, 62 CEG500_V0HF1, 62 CEG500 V0HF1, 62CEG_500V0HF1, 62CEG500_V0HF1, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Lati, Polyamide6, Nylon6, CEG62
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Zero Halogen Content, Halogen Free, Low Phosphorus Content.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Notes
1Typical properties: these are not to be construed as specifications.
2at 60 MPa of cavity pressure
320000 hr
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.