IDES Prospector Already have an account? Login Here

IDES

Clearflex® MP D0

Very Low Density Polyethylene

Supplied by Polimeri Europa

The technical datasheet with complete property values for Clearflex® MP D0 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Clearflex® MP D0 is a linear low density polyethylene, with antioxidants, characterised by a very low density (VLDPE). The resinshows an excellent balance between flexibility and impact resistance.

Clearflex® MP D0 is suitable for injection moulding. Manufacts made by Clearflex® MP D0 are characterised by a high flexibility. Clearflex® MP D0 is recommended for seals and gaskets, for blends with polyolefins to modify and improve impact resistance.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Food Contact Acceptable
  • Good Flexibility
  • Good Impact Resistance
  
Uses 
  • Blending
  • Gaskets
  • Seals
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 527-2
Yield, Injection Molded
psi
  
Break, Injection Molded
psi
  
Tensile Strain (Break, Injection Molded)
%
 ISO 527-2
Flexural Modulus (Injection Molded)
psi
 ISO 178
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, Injection Molded)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ISO 306/A
Melting Temperature
°F
 Internal Method
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Clearflex® MP D0, Clearflex MP D0, Clearflex® , Clearflex, ClearflexMPD0, MP D 0, MP D0, MPD, D0, MPD0, Polyethylene, Very Low Density, Polyethylene Very Low Density, VLDPE, Polyethylene, PE, Polimeri Europa, PolyethyleneVeryLowDensity, DMP
Features
Features may also be described by the following terms: Good Flexibility, Flexible, Good Impact Resistance.
Uses
Uses may also be described by the following terms: Gaskets, Gasketing.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1).
Injection
Nominal Value
Unit
 
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.