IDES Prospector Already have an account? Login Here

IDES

SABIC® LDPE 1922SF

Low Density Polyethylene

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® LDPE 1922SF is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Description.
SABIC® LDPE 1922SF is an additive free LDPE grade produced by SABIC's CTR® tubular technology. This grade is specially developed for food contact applications that require high product quality, consistency and high level of purity. SABIC will offer for SABIC® LDPE 1922SF the full food compliance service package.

Application.
SABIC® LDPE 1922SF is very suitable for masterbatches with a very high loading of carbon black, titanium dioxide or pigment. Also suitable for applications that require a good balance between flow properties and mechanical properties.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Additive Free
  • Food Contact Acceptable
  • High Purity
Uses 
  • Food Containers
  • Food Packaging
  • Masterbatch
Processing Method 
  • Compression Molding
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
     ISO 1133
190°C/2.16 kg
g/10 min
  
190°C/5.0 kg
g/10 min
  
Melt Volume-Flow Rate (MVR)
     ISO 1133
190°C/2.16 kg
in³/10min
  
190°C/5.0 kg
in³/10min
  
Environmental Stress-Cracking Resistance 2 (140°F, 0.118 in, Rhodacal-DS10)
hr
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F, 0.0787 in)
psi
 ISO 527-2/1BA/50
Tensile Stress
     ISO 527-2/1BA/50
Yield, 73°F, 0.0787 in, Compression Molded
psi
  
Break, 73°F, 0.0787 in
psi
  
Tensile Strain (Break, 73°F, 0.0787 in)
%
 ISO 527-2/1BA/50
Tensile Creep Modulus
     ISO 899-1
1 hr
psi
  
1000 hr
psi
  
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
     ISO 180/A
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore A, 73°F)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Vicat Softening Temperature
°F
 ISO 306/A
Melting Temperature (DSC)
°F
 ISO 3146
Enthalpy Change
J/g
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® LDPE 1922SF, SABIC LDPE 1922SF, SABIC® LDPE , SABIC LDPE, SABICLDPE1922SF, SABICLDPE, LDPE 1922 SF, LDPE1922SF, LDPE1922, LDPE, 1922 SF, 1922SF, Polyethylene, Low Density, Polyethylene Low Density, Polyethylene, PE, SABIC, PolyethyleneLowDensity, SF1922, 1922LDPE
Features
Features may also be described by the following terms: Additive Free, No Additives, High Purity.
Uses
Uses may also be described by the following terms: Food Containers, Food Container, Food Packaging.
Notes
1Typical properties: these are not to be construed as specifications.
22 MPa
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.