IDES Prospector Already have an account? Login Here

IDES

VICTREX® PEEK 150G903 Black

Polyetheretherketone

Supplied by Victrex plc

The technical datasheet with complete property values for VICTREX® PEEK 150G903 Black is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Product Description:
High performance thermoplastic material, unreinforced PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection moulding, easy flow, FDA food contact compliant, colour black.

Typical Application Areas:
Complex geometries with thin cross sections or long flow lengths, for high strength and stiffness as well as good ductility. Chemically resistant to aggressive environments, suitable for sterilization for medical and food contact applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Ductile
  • Food Contact Acceptable
  • Good Chemical Resistance
  • Good Flow
  • Good Sterilizability
  • High Stiffness
  • High Strength
  • Semi Crystalline
Uses 
  • Food Service Applications
  • Medical Appliances
  
Agency Ratings 
Appearance 
  • Black
Forms 
  • Powder
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
     ISO 1183
-- 2
g/cm³
  
-- 3
g/cm³
  
Molding Shrinkage 4
     ISO 294-4
Across Flow
%
  
Flow
%
  
Water Absorption
     ISO 62
73°F, 24 hr, 0.126 in
%
  
Saturation, 73°F
%
  
Spiral Flow 5 (39.4 mil)
in
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2
Tensile Stress (Yield, 73°F)
psi
 ISO 527-2
Tensile Strain (Break, 73°F)
%
 ISO 527-2
Flexural Modulus (73°F)
psi
 ISO 178
Flexural Strength
     ISO 178
527°F
psi
  
347°F
psi
  
257°F
psi
  
73°F
psi
  
Compressive Stress
     ISO 604
73°F
psi
  
248°F
psi
  
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180/A
Unnotched Izod Impact Strength (73°F)
 
 ISO 180
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (73°F)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/Af
Glass Transition Temperature
°F
 ISO 11357-2
Melting Temperature
°F
 ISO 11357-3
CLTE
     ISO 11359-2
Flow: < 289°F
in/in/°F
  
Flow: > 289°F
in/in/°F
  
Transverse: < 289°F
in/in/°F
  
Transverse: > 289°F
in/in/°F
  
Thermal Conductivity (73°F)
Btu·in/hr/ft²/°F
  
Specific Heat Capacity (73°F)
Btu/lb/°F
 DSC
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
     IEC 60093
73°F
ohm·cm
  
257°F
ohm·cm
  
527°F
ohm·cm
  
Comparative Tracking Index
V
 IEC 60112
Electric Strength (0.0984 in)
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0591 in)
 
 UL 94
Glow Wire Flammability Index (0.0787 in)
°F
 IEC 60695-2-12
Oxygen Index
     ISO 4589-2
-- 6
%
  
-- 7
%
  
Toxicity
     NES 713
-- 8
 
  
-- 9
 
  
-- 10
 
  
Fill Analysis
Nominal Value
Unit
Test Method
Melt Viscosity (752°F)
Pa·s
 Internal Method
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: VICTREX® PEEK 150G903 Black, VICTREX PEEK 150G903 Black, VICTREX® PEEK , VICTREX PEEK, VICTREXPEEK150G903Black, VICTREXPEEK, PEEK 150 G 903 Black, PEEK150G903 Black, PEEK150, PEEK, 150 G 903 Black, PEEK150G903Black, 150G903 Black, 150G, G903, 903Black, 150G903Black, Polyetheretherketone, Polyaryletherketone, PAEK, Victrex, G150, 150PEEK
Features
Features may also be described by the following terms: Good Flow, Semi-Crystalline, Good Chemical Resistance, Chemical Resistant, Good Starilizability, Sterilizable, High Stiffness, High Strength.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Hopper Temperature
°F
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Mold Temperature
°F
  
Injection Notes
Runner: Die/nozzle >3mm, manifold >3.5mm
Gate: >1mm or .5 x part thickness
Notes
1Typical properties: these are not to be construed as specifications.
2Amorphous
3Crystalline
4365°C nozzle, 160°C tool
5365 °C nozzle, 160°C tool
6.4 mm
73.2 mm
8CO2 content
9Total gasses
10CO content
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.