IDES Prospector Already have an account? Login Here

IDES

TechnoDur PBT 4 GF30 black (9986)

Polybutylene Terephthalate

Glass Fiber Reinforcement, 30%

Supplied by TechnoCompound GmbH

The technical datasheet with complete property values for TechnoDur PBT 4 GF30 black (9986) is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PBT, injection moulding, 30% glass fibre, heat stabilized, high strength and stiffness, for indoor applications
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Additive 
  • Heat Stabilizer
Features 
  • Heat Stabilized
  • High Stiffness
  • High Strength
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (250°C/2.16 kg)
in³/10min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Break)
psi
 ISO 527-2/5
Tensile Strain (Break)
%
 ISO 527-2/5
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0315 in)
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: TechnoDur PBT 4 GF30 black, TechnoDur PBT 4 GF30 black (9986), TechnoDur PBT 4 GF30 black 9986, TechnoDur , TechnoDurPBT4GF30black9986, PBT 4 GF 30 black, PBT 4 GF30 black, PBT 4 GF 30 black 9986, PBT4GF30black, PBT 4 GF30 black (9986), PBT 4 GF30 black 9986, PBT4, 4GF, GF30, 30black, black9986, PBT4GF30black9986, Polybutylene Terephthalate, PBT, Polyester, TechnoCompound, PolybutyleneTerephthalate, 4PBT
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, High Stiffness, High Strength.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Rate
 
  
Holding Pressure
psi
  
Back Pressure
psi
  
Screw Speed
rpm
  
Injection Notes
Residence Time: 5 to 10 min
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.