Flexirene® MS 26 A Polimeri Europa Polyethylene, Linear Low Density

Product Description

Flexirene® MS 26 A is a linear low density polyethylene (LLDPE) with antioxidants, suitable for injection moulding application.

Parts made by Flexirene® MS 26 A are characterised by optimum low temperature properties. Flexirene® MS 26 A is highly pure and it is suitable for all applications where good organoleptic properties are required.

Flexirene® MS 26 A is recommended for the production of lids, caps, closures and containers, and, is suggested for low temperature applications.

General

Material Status

Commercial: Active

Availability

Europe

North America

Additive

Antioxidant

Features

Antioxidant

Food Contact Acceptable

Good Organoleptic Properties

High Purity

Low Temperature Resistant

Uses

Caps

Closures

Containers

Lids

Low Temperature Applications

Agency Ratings

Forms

Pellets

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress			ISO 527-2
Yield, Injection Molded		psi
Break, Injection Molded		psi
Tensile Strain (Break, Injection Molded)		%	ISO 527-2
Flexural Modulus (Injection Molded)		psi	ISO 178
Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D, Injection Molded)			ISO 868
Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature		°F	ASTM D746
Vicat Softening Temperature		°F	ISO 306/A
Melting Temperature		°F	Internal Method
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Flexirene® MS 26 A, Flexirene MS 26 A, Flexirene® , Flexirene, FlexireneMS26A, MS 26 A, MS26, 26A, MS26A, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Polimeri Europa, PolyethyleneLinearLowDensity, 26MS
Features
Features may also be described by the following terms: Good Organoleptic Properties, High Purity, Low Temperature Resistant, Low Temperature Performance.
Uses
Uses may also be described by the following terms: Closure Caps, Caps, Cap.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1).

Injection	Nominal Value	Unit
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

Flexirene® MS 26 A

Linear Low Density Polyethylene

Supplied by Polimeri Europa