IDES Prospector Already have an account? Login Here

IDES

Cardia Biohybrid™ H-M03

Thermoplastic Starch + PP

Supplied by Cardia Bioplastics™

The technical datasheet with complete property values for Cardia Biohybrid™ H-M03 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Cardia Biohybrid™ H-M03 is based on a blend of thermoplastic starch (TPS) and polyolefin's. This grade of resin is compatibilised to offer a high level of mechanical strength, good impact resistance and toughness. The resin is based on corn starch which is a renewable material.

  • A Biohybrid™ resin offering a significant reduction in carbon footprint (compared to polyolefins PE/PP)
  • An effective contribution to sustainability where biodegradability/compostability is not required
  • Designed for thin and thick gauge rigid moulding and extrusion applications.

Cardia Biohybrid™ H-M03 is formulated with 50% of renewable thermoplastic starch polymer. This resin is suitable for a wide range of products manufactured by injection moulding or extrusion processes. Due to its content of polypropylene the material is not a fully biodegradable polymer and it is not intended for ultimate disposal in commercial composting facilities. If biodegradability or compostability is required, use of Cardia Compostable B-M or TBM resin is recommended.

Application Examples

  • Injection moulded products such as cutlery, toothbrushes, combs, shavers, golf-tees, etc.
  • Stakes and pegs
  • Horticultural products such as flower pots and stakes
  • Injection moulded containers, caps and closures
  • Disposable plates and produce trays
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  
Features 
  • Food Contact Acceptable
  • Good Impact Resistance
  • Good Toughness
  • High Strength
  • Renewable Resource Content
Uses 
  • Caps
  • Closures
  • Containers
  • Disposable Tableware
  • Lawn and Garden Equipment
  • Pacifiers
  • Personal Care
  • Support Trays
  • Table Products
  • Toothbrush Handles
Agency Ratings 
Processing Method 
  • Extrusion
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D4883
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Break)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Peak Melting Temperature
°F
 ASTM D3418
Additional Information
Nominal Value
Unit
Test Method
Biobased Content - Starch
%
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Cardia Biohybrid™ H-M03, Cardia Biohybrid HM03, Cardia Biohybrid™ , Cardia Biohybrid, CardiaBiohybridHM03, CardiaBiohybrid, H M 03, H-M03, HM03, H:M03, H/M03, H+M03, H_M03, H M03, HM, M03, Thermoplastic Starch + PP, Thermoplastic Starch PP, Thermoplastic Starch : PP, Thermoplastic Starch / PP, Thermoplastic Starch - PP, Thermoplastic Starch _ PP, Thermoplastic Starch PP, TPS+PP, TPSPP, TPS:PP, TPS/PP, TPS-PP, TPS_PP, TPS PP, Biodegradable Polymers, Biodeg Polymers, Cardia Bioplastics, ThermoplasticStarchPP, BiodegradablePolymers, BiodegPolymers, ThermoplasticStarch_PP, MH
Features
Features may also be described by the following terms: High Strength, Good Impact Resistance, Good Toughness, Tough, Renewable Resources, From Renewable Resources, Renewable Resource Derived, Renewable Raw Materials, Renewable Resource Content.
Uses
Uses may also be described by the following terms: Closure Caps, Caps, Cap, Lawn and Garden Equipment, Lawn Equipment, Garden Equipment, Disposable Tableware, Support Trays.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.