IDES Prospector Already have an account? Login Here

IDES

Retpol® PP 9035

Polypropylene Homopolymer

Supplied by PolyPacific Pty. Ltd.

The technical datasheet with complete property values for Retpol® PP 9035 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Retpol PP 9035 is a high flow, flame retardant homopolymer polypropylene compound. The flame retardant system is based on halogenated hydrocarbon compounds with an antimony trioxide synergist.

APPLICATION:
This flame retardant compound has been developed for thin walled parts or those with long flow paths and where a high gloss finish is required with minimal sink marks.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Additive 
  • Flame Retardant
Features 
  • Flame Retardant
  • Halogenated
  • High Flow
  • High Gloss
  • Homopolymer
Uses 
  • Thin-walled Parts
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow 2
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 3
psi
 ASTM D638
Tensile Elongation 3 (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ASTM D256
Unnotched Izod Impact
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
CLTE - Flow (-22 to 86°F)
in/in/°F
 ASTM D696
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0630 in
 
  
0.118 in
 
  
Glow Wire Flammability Index 4 (0.118 in)
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Retpol® PP 9035, Retpol PP 9035, Retpol® , Retpol, RetpolPP9035, PP 9035, PP9035, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, PolyPacific, PolypropyleneHomopolymer, PPHomopolymer, 9035PP
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI, Halogenated, Contains Halogen, High Gloss.
Uses
Uses may also be described by the following terms: Thin-walled Parts, Thin Walled Parts, Thin-wall Parts, Thin wall Parts, Thinwall Parts.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Nozzle Temperature
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Figures quoted here are based on laboratory moulded pieces. As many factors affect part shrinkage (eg thickness, moulding conditions, part configuration etc.) users should make their own tests to determine tooling figures.
32.0 in/min
4Australian/ New Zealand Standard test method AS/NZS 60695.2.12
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.