IDES Prospector Already have an account? Login Here

IDES

EMERGE™ PC 8210-31

Advanced Resin

Supplied by Styron LLC

The technical datasheet with complete property values for EMERGE™ PC 8210-31 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
EMERGE™ PC 8210-31 advanced resin is a translucent, ignition resistant polycarbonate resin. This resin contains no bromine, chlorine, or phosphate flame retardants and is intended to comply with global environmental standards. It combines mechanical performance and high heat resistance with excellent processing characteristics in injection molded applications.
EMERGE™ PC 8210-31 has a UL 94 V-0 rating at 1.5 mm and 3.0 mm and UL 5VA rating at 3.0 mm.

Applications:
  • Electrical
  • Fixtures
  • Enclosures
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Flame Retardant
  • Mold Release
  
Appearance 
  • Opaque
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/B
Melt Mass-Flow Rate (MFR) (300°C/1.2 kg)
g/10 min
 ISO 1133
Molding Shrinkage
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress
     ISO 527-2/50
Yield
psi
  
Break
psi
  
Tensile Strain
     ISO 527-2/50
Yield
%
  
Break
%
  
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180/A
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Annealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
264 psi, Annealed
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
Ball Indentation Temperature
°F
 IEC 60335-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL 2
     UL 94
0.0591 in
 
  
0.118 in
 
  
Glow Wire Flammability Index 2
     IEC 60695-2-12
0.0394 in
°F
  
0.0787 in
°F
  
0.118 in
°F
  
Glow Wire Ignition Temperature 2
     IEC 60695-2-13
0.0394 in
°F
  
0.0787 in
°F
  
0.118 in
°F
  
Oxygen Index 2
%
 ISO 4589-2
Needle Flame Test 2 (59.1 mil)
 
 IEC 60695-2-2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: EMERGE™ PC 8210-31, EMERGE PC 821031, EMERGE™ , EMERGE, EMERGEPC821031, PC 8210, PC 8210-31, PC 821031, PC 8210:31, PC 8210/31, PC 8210+31, PC 8210_31, PC 8210 31, PC8210, 821031, PC821031, PC8210_31, Polycarbonate, PC, Styron, 8210PC
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2This rating not intended to reflect hazards presented by this or any other material under actual fire conditions.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.