IDES Prospector Already have an account? Login Here

IDES

Styrolux® 3G55 GK

Styrene Butadiene Block Copolymer

Supplied by Styrolution

The technical datasheet with complete property values for Styrolux® 3G55 GK is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • North America
  
RoHS Compliance 
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 2 (73°F)
psi
 ASTM D638
Tensile Strength (Yield, 73°F)
psi
 ASTM D638
Tensile Elongation (Break, 73°F)
%
 ASTM D638
Flexural Modulus (73°F)
psi
 ASTM D790
Flexural Strength (73°F)
psi
 ASTM D790
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Secant Modulus
     ASTM D882
MD: 1.0 mil, Blown Film
psi
  
TD: 1.0 mil, Blown Film
psi
  
Tensile Elongation
     ASTM D882
MD: Break, 1.0 mil, Blown Film
%
  
TD: Break, 1.0 mil, Blown Film
%
  
Dart Drop Impact (1.0 mil, Blown Film)
g
 ASTM D1709
Elmendorf Tear Strength
     ASTM D1922
MD: 1.0 mil, Blown Film
g
  
TD: 1.0 mil, Blown Film
g
  
Oxygen Transmission Rate (73°F, 1.0 mil, Blown Film, 50% RH)
cm³/100 in²/24 hr
 ASTM D3985
Water Vapor Transmission 3
g/100 in²/24 hr
 ASTM F1249
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
 
 ASTM D256
Instrumented Dart Impact
     ASTM D3763
Energy to Peak Force
in·lb
  
Total Energy
in·lb
  
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Vicat Softening Temperature
°F
 ASTM D1525 4
CLTE - Transverse
in/in/°F
 ASTM E831
Optical
Nominal Value
Unit
Test Method
Refractive Index
 
 ASTM D542
Transmittance
%
 ASTM D1003
Haze (1.00 mil, Blown Film)
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Styrolux® 3G55 GK, Styrolux 3G55 GK, Styrolux® , Styrolux, Styrolux3G55GK, 3 G 55 GK, 3G55 GK, 3G, G55, 55GK, 3G55GK, Styrene Butadiene Block Copolymer, SBC, Thermoplastic Elastomer, TPE, sb, Styrolution, StyreneButadieneBlockCopolymer, ThermoplasticElastomer, G3
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
323°C, 100% RH, 1 mil, Blown Film
4Rate B (120°C/h), Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.