IDES Prospector Already have an account? Login Here

IDES

VYNTEC CF8050

Phenolic

Carbon Fiber Reinforcement, 50%

Supplied by Vyncolit N.V.

The technical datasheet with complete property values for VYNTEC CF8050 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Vyntec® CF8050 is a carbon fiber reinforced phenolic moldable composite with good tribological and superior mechanical properties combined with low density.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Carbon Fiber Reinforcement, 50% Filler by Weight
Agency Ratings 
 
RoHS Compliance 
Appearance 
  • Black
Processing Method 
  • Compression Molding
  • Injection Molding
  • Resin Transfer Molding
Part Marking Code (ISO 11469)
  • >PF-CF50<
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Apparent Density
g/cm³
 ISO 60
Molding Shrinkage
%
 ISO 2577
Water Absorption (73°F, 24 hr)
%
 ISO 62
Post Shrinkage
%
 ISO 2577
Mechanical
Nominal Value
Unit
Test Method
Flexural Modulus (Injection Molded)
psi
 ISO 178
Flexural Strength (Injection Molded)
psi
 ISO 178
Compressive Stress
psi
 ISO 604
Flexural Strain at Break
%
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (Injection Molded)
ft·lb/in²
 ISO 179
Charpy Unnotched Impact Strength (Injection Molded)
ft·lb/in²
 ISO 179
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: VYNTEC CF8050, VYNTEC , VYNTECCF8050, CF 8050, CF8050, Phenolic, Vyncolit, 8050CF
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (2).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.