IDES Prospector Already have an account? Login Here

IDES

InnoPlus LD2420K

Low Density Polyethylene

Supplied by PTT Chemical Public Company Limited

The technical datasheet with complete property values for InnoPlus LD2420K is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Special Characteristics : InnoPlus LD2420K is produced by high pressure tubular process, a technology licensed by LyondellBasell. This grade has well balance property of optical property, mechanical property and processability.

Typical Applications : InnoPlus LD2420K is designed for variety of film application such as general purpose film, shrink film, zip bag and food packaging film. In addition, LD2420K is very suitable for liner cap, drinking water cap and vegetable oil cap and foam application.

Additives : No additives.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Additive Free
  • General Purpose
  • Good Processability
  • Opticals
  
Uses 
  • Bags
  • Caps
  • Film
  • Foam
  • General Purpose
  • Packaging
  • Shrink Wrap
Agency Ratings 
RoHS Compliance 
Processing Method 
  • Film Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (Compression Molded)
psi
 ISO 527-2
Tensile Stress (Yield, Compression Molded)
psi
 ISO 527-2
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Tensile Stress
     ISO 527-3
MD: Break, 2.0 mil, Blown Film
psi
  
TD: Break, 2.0 mil, Blown Film
psi
  
Tensile Elongation
     ISO 527-3
MD: Break, 2.0 mil, Blown Film
%
  
TD: Break, 2.0 mil, Blown Film
%
  
Dart Drop Impact (2.0 mil, Blown Film)
g
 ASTM D1709
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525
Melting Temperature
°F
 ISO 11357-3
Optical
Nominal Value
Unit
Test Method
Gloss (20°, 1.97 mil, Blown Film)
 
 ASTM D2457
Haze (1.97 mil, Blown Film)
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: InnoPlus LD2420K, InnoPlus , InnoPlusLD2420K, LD 2420 K, LD2420K, LD2420, 2420K, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, PTT Chemical, PolyethyleneLowDensity, 2420LD
Features
Features may also be described by the following terms: Good Processability, Easy Processing, Additive Free, No Additives.
Uses
Uses may also be described by the following terms: Shrink Wrap, Closure Caps, Caps, Cap.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.