IDES Prospector Already have an account? Login Here

IDES

Valtec HP649

Polypropylene Homopolymer

Supplied by INDELPRO, S.A. de C.V.

The technical datasheet with complete property values for Valtec HP649 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Valtec is the new controlled morphology polypropylene manufactured by Indelpro using the Spheripol process. Compared to ordinary pelletized polypropylene, Valtec could present advantages in terms of improved productivity, better processing and lower energy consumption. Valtec HP649 is a fractional melt flow polypropylene homopolymer resin, with a conventional molecular weight distribution particularly suitable for compounding products or Master Batch of additives or color.

The base resin in this product meets the requirements of the U.S. Food and Drug Administration (FDA) contained in the Code of Federal Regulations in 21 CFR 177.1520.
General  
Material Status 
  • Commercial: Active
Availability 
  • Latin America
Features 
  • Food Contact Acceptable
  • Good Processability
  • Homopolymer
Uses 
  • Color Concentrates
  • Compounding
  • Masterbatch
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Compounding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792A
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Yield)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790B
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Valtec HP649, Valtec , ValtecHP649, HP 649, HP649, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Indelpro, PolypropyleneHomopolymer, PPHomopolymer, 649HP
Features
Features may also be described by the following terms: Good Processability, Easy Processing.
Uses
Uses may also be described by the following terms: Compounding, Compounds.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.