IDES Prospector Already have an account? Login Here

IDES

EMERGE™ PC 8410-15

Advanced Resin

Supplied by Styron LLC

The technical datasheet with complete property values for EMERGE™ PC 8410-15 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
EMERGE™ PC 8410-15 advanced resin is a transparent, ignition resistant PC resin that contains no chlorinated or brominated or phosphorous based additives. The resin is designed to meet the German norm DIN VDE-0472/Part 815 on halogens. This resin combines good mechanical and high heat properties and maintains excellent processability contains mould release agent. EMERGE ™ PC 8410-15 has a UL 94 V-0 rating at 3.0 mm.

Applications:
  • Electrical
  • Fixtures
  • Enclosures
  • Displays
  • Lighting
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Flame Retardant
  • Mold Release
 
Agency Ratings 
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183/B
Melt Mass-Flow Rate (MFR) (300°C/1.2 kg)
g/10 min
ISO 1133
Molding Shrinkage - Flow
%
ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2
Tensile Stress
    ISO 527-2
Yield
psi
 
Break
psi
 
Tensile Strain
    ISO 527-2
Yield
%
 
Break
%
 
Flexural Modulus
psi
ISO 178
Flexural Strength
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eA
Notched Izod Impact Strength (73°F)
ft·lb/in²
ISO 180/A
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
     
66 psi, Annealed
°F
ISO 75-2/B
264 psi, Unannealed
°F
ISO 75-2/A
264 psi, Annealed
°F
ISO 75-2/A
Vicat Softening Temperature
°F
ISO 306/B50
Ball Indentation Temperature
°F
IEC 60335-1
CLTE - Flow
in/in/°F
ASTM D696
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
IEC 60093
Volume Resistivity
ohm·cm
IEC 60093
Dielectric Constant
    IEC 60250
1 Hz
 
 
50 Hz
 
 
Dissipation Factor
    IEC 60250
1 Hz
 
 
50 Hz
 
 
Comparative Tracking Index (Solution A)
V
IEC 60112
Electric Strength
V/mil
IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL 2
    UL 94
0.0295 in
 
 
0.0591 in
 
 
0.118 in
 
 
Glow Wire Flammability Index 2
    IEC 60695-2-12
0.0394 in
°F
 
0.0787 in
°F
 
0.118 in
°F
 
Glow Wire Ignition Temperature 2
    IEC 60695-2-13
0.0394 in
°F
 
0.0787 in
°F
 
0.118 in
°F
 
Oxygen Index 2
%
ISO 4589-2
Optical
Nominal Value
Unit
Test Method
Transmittance
%
ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: EMERGE™ PC 8410-15, EMERGE PC 841015, EMERGE™ , EMERGE, EMERGEPC841015, PC 8410, PC 8410-15, PC 841015, PC 8410:15, PC 8410/15, PC 8410+15, PC 8410_15, PC 8410 15, PC8410, 841015, PC841015, PC8410_15, Polycarbonate, PC, Styron, 8410PC
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): DIN (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
2This rating not intended to reflect hazards presented by this or any other material under actual fire conditions.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.