IDES Prospector Already have an account? Login Here

IDES

SABIC® PPcompound 15T1020

Polypropylene

Talc Filler

Supplied by SABIC Innovative Plastics

The technical datasheet with complete property values for SABIC® PPcompound 15T1020 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SABIC® PPcompound 15T1020. This grade is a general purpose, talc filled, heat stabilized polypropylene resin suitable for injection molded applications. The IMDS ID is 16486973.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Talc Filler
Additive 
  • Heat Stabilizer
Features 
  • General Purpose
  • Heat Stabilized
  
Automotive Specifications 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
      
-- 2
psi
 ASTM D638
--
psi
 ISO 527-2/1
Tensile Strength
      
Yield 3
psi
 ASTM D638
Yield
psi
 ISO 527-2/50
Break 3
psi
 ASTM D638
Break
psi
 ISO 527-2/1A/50
Tensile Elongation
      
Yield 3
%
 ASTM D638
Yield
%
 ISO 527-2/50
Break 3
%
 ASTM D638
Break
%
 ISO 527-2/50
Flexural Modulus
      
1.97 in Span 4
psi
 ASTM D790
2.52 in Span 5
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F 6
ft·lb/in²
  
73°F 7
ft·lb/in²
  
Notched Izod Impact
      
73°F, 0.126 in 8
ft·lb/in
 ASTM D256
-22°F 6
ft·lb/in²
 ISO 180/1A
32°F 6
ft·lb/in²
 ISO 180/1A
73°F 6
ft·lb/in²
 ISO 180/1A
Unnotched Izod Impact 8 (73°F, 0.126 in)
ft·lb/in
 ASTM D4812
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
66 psi, Unannealed, 0.126 in
°F
 ASTM D648
66 psi, Unannealed 6
°F
 ISO 75-2/B
264 psi, Unannealed, 0.126 in
°F
 ASTM D648
264 psi, Unannealed 6
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/A50
Coefficient of Linear Thermal Expansion
     ISO 11359-2
Flow: -22 to 212°F
µm/Mk
  
Transverse: -22 to 212°F
µm/Mk
  
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics, GE Polymerland

Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® PPcompound 15T1020, SABIC PPcompound 15T1020, SABIC® PPcompound , SABIC PPcompound, SABICPPcompound15T1020, SABICPPcompound, PPcompound 15 T 1020, PPcompound15T1020, PPcompound15, PPcompound, 15 T 1020, 15T1020, 15T, T1020, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, SABIC IP, PolypropyleneUnspecified, PPUnspecified, T15, 15PPcompound
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): IMDS (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
3Type I, 2.0 in/min
40.051 in/min
50.079 in/min
680*10*4mm, Cut
780*10*4 mm, Cut
863.5*12.7*3.2mm, Cut
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.