IDES Prospector Already have an account? Login Here

IDES

LNP* Faradex* NX07331

Acrylonitrile Butadiene Styrene + PC

Supplied by SABIC Innovative Plastics Asia Pacific

The technical datasheet with complete property values for LNP* Faradex* NX07331 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
FARADEX NX07331 is a commercial grade EMI shielding material
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Electromagnetic Shielding (EMI)
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (270°C/10.0 kg)
g/10 min
ASTM D1238
Molding Shrinkage
    ASTM D955
Flow: 24 hr
in/in
 
Across Flow: 24 hr
in/in
 
Water Absorption (Equilibrium, 73°F, 50% RH)
%
ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 2
psi
ASTM D638
Tensile Strength (Break)
psi
UL 1581
Tensile Strain (Break)
%
ISO 527-2/50
Flexural Modulus (0.252 in)
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength 3 (73°F)
ft·lb/in²
ISO 180/1A
Unnotched Izod Impact Strength 3 (73°F)
ft·lb/in²
ISO 180/1U
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed, 0.252 in)
°F
ASTM D648
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
ASTM D257
Shielding Effectiveness (0.12 in)
dB
Internal Method
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (-0.0709 in)
 
UL 94
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics

Product names can be difficult to match. You may have searched any one of these terms to find this product: LNP* Faradex* NX07331, LNP Faradex NX07331, LNP* Faradex* , LNP Faradex, LNPFaradexNX07331, LNPFaradex, NX 07331, NX07331, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, SABIC IP Asia, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, 07331NX
Features
Features may also be described by the following terms: Electromagnetic Shielding (EMI), EMI Shielding.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Suggested Max Moisture
%
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Back Pressure
psi
 
Screw Speed
rpm
 
Notes
1Typical properties: these are not to be construed as specifications.
20.20 in/min
380*10*3
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.