IDES Prospector Already have an account? Login Here

IDES

Lupoy® 1303-15

Polycarbonate

Supplied by LG Chem Ltd.

The technical datasheet with complete property values for Lupoy® 1303-15 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LUPOY PC 1303-15 resin is designed for extrusion and injection molding products. It exhibits an excellent physical property balance of heat resistance, transparency and impact strength.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
  • South America
  
Additive 
  • UV Stabilizer
Features 
  • Good Impact Resistance
  • Good Mold Release
  • High Clarity
  • High Heat Resistance
  • Medium Viscosity
Uses 
  • Appliances
  • Automotive Applications
  • Outdoor Applications
Processing Method 
  • Extrusion
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (300°C/1.2 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Water Absorption
     ASTM D570
73°F, 24 hr
%
  
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638
Tensile Strength
     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation
     ASTM D638
Yield
%
  
Break
%
  
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Taber Abrasion Resistance - Change in Haze 2
%
 ASTM D1004
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact 3 (73°F, 0.126 in)
ft·lb/in
 ASTM D256
Unnotched Izod Impact (73°F)
 
 ASTM D256
Instrumented Dart Impact 4 (73°F, 0.126 in, Total Energy)
in·lb
 ASTM D3763
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness
     ASTM D785
M-Scale
 
  
R-Scale
 
  
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Annealed, 0.157 in
°F
  
264 psi, Unannealed, 0.157 in
°F
  
264 psi, Annealed, 0.157 in
°F
  
Vicat Softening Temperature
°F
 ASTM D1525 5
Ball Indentation Temperature
°F
 IEC 60598-1
CLTE - Flow (-40 to 180°F)
in/in/°F
 ASTM D696
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity (73°F)
ohm·cm
 ASTM D257
Dielectric Strength
V/mil
 ASTM D149
Dielectric Constant (60 Hz)
 
 ASTM D150
Dissipation Factor (60 Hz)
 
 ASTM D150
Comparative Tracking Index (0.0787 in)
V
 IEC 60112
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0591 in
 
  
0.118 in
 
  
Glow Wire Ignition Temperature 6 (0.0787 in)
°F
 IEC 60695-2-13
Oxygen Index
%
 ASTM D2863
UL File Number
 
  
Average Extent of Burning
in
 ASTM D635
Optical
Nominal Value
Unit
Test Method
Refractive Index
 
 ASTM D542
Transmittance
%
 ASTM D1003
Haze
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Lupoy® 1303-15, Lupoy 130315, Lupoy® , Lupoy, Lupoy130315, 1303, 1303-15, 130315, 1303:15, 1303/15, 1303+15, 1303_15, 1303 15, Polycarbonate, PC, LG Chem, 151303
Features
Features may also be described by the following terms: High Heat Resistance, High Clarity, Good Impact Resistance, Medium Viscosity, Good Mold Release, Easy Release, Good Demolding.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Notes
1Typical properties: these are not to be construed as specifications.
21000g, 500 cycles, CS-10F Wheel
39.8 mil Notch Depth
411.1 ft/sec
5Rate A (50°C/h), Loading 2 (50 N)
65 sec
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.