IDES Prospector Already have an account? Login Here

IDES

Purell GC7260 G

High Density Polyethylene

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Purell GC7260 G is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Purell GC7260 G is a HDPE material which exhibits good flowability and high rigidity. It contains an additive package for improved performace at higher extrusion temperatures and faster cycle times.

Due to the grade's good flow and high stiffness, customers select Purell GC7260 G for thin wall injection moulded parts such as caps and closures for healthcare applications.

Without exception, all potential Healthcare Applications activities have to be discussed with the relevant Technical and Business contacts first.

To discuss a Healthcare Application please contact your local Distributor or your local LyondellBasell contact.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Europe
  
Features 
  • Autoclavable
  • Ethylene Oxide Sterilizable
  • Fast Molding Cycle
  • Good Flow
  • Good Thermal Stability
  • High Rigidity
  • Low Warpage
Uses 
  • Caps
  • Closures
  • Medical/Healthcare Applications
  • Thin-walled Parts
  • Tubing
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Melt Volume-Flow Rate (MVR) (190°C/5.0 kg)
in³/10min
 ISO 1133
FNCT 2 (122°F)
hr
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Yield)
%
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Ball Indentation Hardness (H 132/30)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/B50
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Purell GC7260 G, Purell , PurellGC7260G, GC 7260 G, GC7260 G, GC7260, 7260G, GC7260G, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, LyondellBasell, PolyethyleneHighDensity, 7260GC
Features
Features may also be described by the following terms: Good Flow, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, High Rigidity, Autoclavable, Autoclave, Ethylene Oxide Sterilizable, EtO Sterilizable, EtO Sterilization, Ethylene Oxide Sterilizable, Good Thermal Stability, Low Warpage, Low Warp.
Uses
Uses may also be described by the following terms: Closure Caps, Caps, Cap, Tubing, Tube, Medical Applications, Thin-walled Parts, Thin Walled Parts, Thin-wall Parts, Thin wall Parts, Thinwall Parts.
Notes
1Typical properties: these are not to be construed as specifications.
26 MPa, 2% Arkopal
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.