IDES Prospector Already have an account? Login Here

IDES

HAIPLEN EP10 G2 BA

Polypropylene Copolymer

Glass Fiber Reinforcement, 10%

Supplied by Taro Plast S.p.A.

The technical datasheet with complete property values for HAIPLEN EP10 G2 BA is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Polypropylene copolymer 10% glass fibres reinforced chemically coupled, medium low flow.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 10% Filler by Weight
Features 
  • Chemically Coupled
  • Copolymer
  • Medium Flow
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ISO 1133
Molding Shrinkage
    Internal Method
Across Flow
%
 
Flow
%
 
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2/1
Tensile Stress (Break)
psi
ISO 527-2/50
Tensile Strain (Break)
%
ISO 527-2/50
Flexural Modulus 2
psi
ISO 178
Flexural Strength 2
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
ASTM D256
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
ISO 75-2/A
Vicat Softening Temperature
     
--
°F
ISO 306/A50
--
°F
ISO 306/B50
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0630 in)
 
UL 94
Oxygen Index
%
ASTM D2863
Additional Information
Nominal Value
Unit
Test Method
Reinforcement Content 3 (1112°F)
%
ISO 3451
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: HAIPLEN EP10 G2 BA, HAIPLEN , HAIPLENEP10G2BA, EP 10 G 2 BA, EP10 G2 BA, EP10, 10G, G2, 2BA, EP10G2BA, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, Taro Plast, PolypropyleneCopolymer, PPCopolymer, 10EP
Features
Features may also be described by the following terms: Medium Flow, Medium Melt, Medium MFI.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Injection Rate
 
 
Injection Notes
Pre-heat Temperature: 70 to 80°C
Pre-heat Time: 3 hr
Notes
1Typical properties: these are not to be construed as specifications.
20.039 in/min
31 hr
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.