IDES Prospector Already have an account? Login Here

IDES

HAIPLEN EP50 C8

Polypropylene Copolymer

Calcium Carbonate Filler, 40%

Supplied by Taro Plast S.p.A.

The technical datasheet with complete property values for HAIPLEN EP50 C8 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Polypropylene copolymer medium flow 40% calcium carbonate filled, good surface appearance and mechanical properties.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Calcium Carbonate Filler, 40% Filler by Weight
Features 
  • Copolymer
  • Medium Flow
  • Pleasing Surface Appearance
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage
     Internal Method
Across Flow
%
  
Flow
%
  
Granule Humidity 2
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 ISO 527-2/50
Tensile Strain (Break)
%
 ISO 527-2/50
Flexural Modulus 3
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
      
--
°F
 ISO 306/A50
--
°F
 ISO 306/B50
Electrical
Nominal Value
Unit
Test Method
Comparative Tracking Index (Solution A)
V
 IEC 60112
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.126 in)
 
 UL 94
Oxygen Index
%
 ASTM D2863
Additional Information
Nominal Value
Unit
Test Method
Reinforcement Content 4 (1112°F)
%
 ISO 3451
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: HAIPLEN EP50 C8, HAIPLEN , HAIPLENEP50C8, EP 50 C 8, EP50 C8, EP50, 50C, C8, EP50C8, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, Taro Plast, PolypropyleneCopolymer, PPCopolymer, 50EP
Features
Features may also be described by the following terms: Medium Flow, Medium Melt, Medium MFI, Pleasing Surface Appearance.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Injection Notes
Pre-heat Temperature: 70 to 80°C
Pre-heat Time: 1 hr
Notes
1Typical properties: these are not to be construed as specifications.
2TARO 002
30.039 in/min
41 hr
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.