HAIPLEN EP80 Y2 Taro Plast Polypropylene Copolymer

Product Description

Polypropylene copolymer medium viscosity, halogen free flame retardant UL94 V2, good mechanical properties. Designed for electrical applications requiring the compliance with RoHS decree (2002/95/CE).

General

Material Status

Commercial: Active

Availability

Europe

Additive

Flame Retardant

Features

Copolymer

Flame Retardant

Halogen Free

Medium Viscosity

Uses

Electrical/Electronic Applications

RoHS Compliance

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ISO 1133
Molding Shrinkage			Internal Method
Across Flow		%
Flow		%
Water Absorption (73°F, 24 hr)		%	ISO 62
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)		psi	ISO 527-2/50
Tensile Strain (Break)		%	ISO 527-2/50
Flexural Modulus²		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (73°F)		ft·lb/in	ASTM D256
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		°F	ISO 75-2/A
Vicat Softening Temperature
--		°F	ISO 306/A50
--		°F	ISO 306/B50
Continuous Use Temperature - 20000 hr		°F	IEC 60216
Electrical	Nominal Value	Unit	Test Method
Comparative Tracking Index (Solution A)		V	IEC 60112
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0394 in
0.0630 in
0.118 in
Glow Wire Flammability Index (0.0394 in)		°F	IEC 60695-2-12
Glow Wire Ignition Temperature (0.0394 in)		°F	IEC 60695-2-13
Oxygen Index		%	ASTM D2863
UL	Nominal Value	Unit	Test Method
Comparative Tracking Index (CTI) (PLC)			UL 746
Hot-wire Ignition (HWI) (PLC)			UL 746
0.0394 in
0.0630 in
0.118 in
High Amp Arc Ignition (HAI) (PLC)			UL 746
0.0394 in
0.0630 in
0.118 in
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: HAIPLEN EP80 Y2, HAIPLEN , HAIPLENEP80Y2, EP 80 Y 2, EP80 Y2, EP80, 80Y, Y2, EP80Y2, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, Taro Plast, PolypropyleneCopolymer, PPCopolymer, 80EP
Features
Features may also be described by the following terms: Medium Viscosity, Zero Halogen Content, Halogen Free.
Uses
Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.

Injection	Nominal Value	Unit
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Rate
Injection Notes
Pre-heat Temperature: 70 to 80°C Pre-heat Time: 1 hr

Notes

¹Typical properties: these are not to be construed as specifications.

²0.039 in/min

HAIPLEN EP80 Y2

Polypropylene Copolymer

Supplied by Taro Plast S.p.A.