IDES Prospector Already have an account? Login Here

IDES

TAROLOX 111 G6 Y0

Polyethylene Terephthalate

Glass Fiber Reinforcement, 30%

Supplied by Taro Plast S.p.A.

The technical datasheet with complete property values for TAROLOX 111 G6 Y0 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PET medium viscosity 30% glass fibres reinforced, halogen free flame retardant UL94 V0, heat stabilized, good flow, good mechanical, thermal and electrical properties, low moisture absorption, good dimensional stability.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Additive 
  • Flame Retardant
  • Heat Stabilizer
 
Features 
  • Flame Retardant
  • Good Dimensional Stability
  • Good Flow
  • Halogen Free
  • Heat Stabilized
  • Low Moisture Absorption
  • Medium Viscosity
Uses 
  • Electrical/Electronic Applications
RoHS Compliance 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Molding Shrinkage
    Internal Method
Across Flow
%
 
Flow
%
 
Water Absorption (73°F, 24 hr)
%
ISO 62
Granule Humidity 2
%
 
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2/1
Tensile Stress (Break)
psi
ISO 527-2/50
Tensile Strain (Break)
%
ISO 527-2/50
Flexural Modulus 3
psi
ISO 178
Flexural Strength 3
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eU
Notched Izod Impact
    ASTM D256
-4°F
ft·lb/in
 
73°F
ft·lb/in
 
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 4 (264 psi, Unannealed)
°F
ISO 75-2/A
Vicat Softening Temperature
°F
ISO 306/B50
Ball Pressure Test (473°F)
 
IEC 60695-10-2
Melting Temperature
°F
ISO 11357-3
CLTE - Flow (-22 to 86°F)
in/in/°F
ISO 11359-2
Continuous Use Temperature
°F
IEC 60216
Electrical
Nominal Value
Unit
Test Method
Comparative Tracking Index (Solution A)
V
IEC 60112
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
    UL 94
0.0295 in
 
 
0.0630 in
 
 
0.126 in
 
 
Glow Wire Flammability Index (0.0394 in)
°F
IEC 60695-2-12
Glow Wire Ignition Temperature (0.0394 in)
°F
IEC 60695-2-13
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: TAROLOX 111 G6 Y0, TAROLOX , TAROLOX111G6Y0, 111 G 6 Y 0, 111 G6 Y0, 111G, G6, 6Y, Y0, 111G6Y0, Polyethylene Terephthalate, PET, Polyester, Taro Plast, PolyethyleneTerephthalate, G111
Features
Features may also be described by the following terms: Medium Viscosity, Zero Halogen Content, Halogen Free, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Good Flow, Low Moisture Absorption, Low Water Absorption, Water Resistant, Moisture Resistant, Good Dimensional Stability, Dimensionally Stable.
Uses
Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Injection Rate
 
 
Notes
1Typical properties: these are not to be construed as specifications.
2TARO 002
30.039 in/min
4120°C/hr
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.