IDES Prospector Already have an account? Login Here

IDES

NuSil CV-2289-1

Silicone

Supplied by NuSil Technology

The technical datasheet with complete property values for NuSil CV-2289-1 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Chemical Resistance
  • Good Tear Strength
  • Moisture Resistant
  • Ozone Resistant
  • Room Temperature Vulcanizing
Appearance 
  • White
Forms 
  • Liquid
Processing Method 
  • Encapsulating
  • Potting
  
Physical
Nominal Value
Unit
Test Method
Apparent Density
g/cm³
 ASTM D1895
Elastomers
Nominal Value
Unit
Test Method
Tensile Strength (Break)
psi
 ASTM D412
Tensile Elongation (Break)
%
 ASTM D412
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Max. Continuous Use Temperature
°F
 ASTM D794
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 ASTM D257
Dielectric Strength
V/mil
 ASTM D149
Thermoset
Nominal Value
Unit
Test Method
Thermoset Components
      
Hardener
 
  
Resin
 
  
Pot Life
min
  
Shelf Life (77°F)
wk
  
Demold Time (212°F)
min
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: NuSil CV-2289-1, NuSil CV22891, NuSil , NuSilCV22891, CV, CV-2289-1, CV22891, CV:2289:1, CV/2289/1, CV+2289+1, CV_2289_1, CV 2289 1, CV2289, 22891, Silicone, 2289CV
Features
Features may also be described by the following terms: Good Chemical Resistance, Chemical Resistant, Moisture Resistant, Water Resistant, Low Moisture Absorption, Low Water Absorption, Good Tear Strength, Room Temperature Vulcanizing, RTV.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.