IDES Prospector Already have an account? Login Here

IDES

Ultramid® C 33

Polyamide 66/6 Copolymer

Supplied by BASF Corporation

The technical datasheet with complete property values for Ultramid® C 33 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Ultramid® C33 is a copolyamide 6/66 grade of intermediate viscosity for the production of mulitlayer film and monofilaments. Ultramid® C33 is well suited for the production of nonsymetric blown film with reduced curl. Its lower melting point than standard PA 6 is advantageous for coextrusion with temperature sensitive polymers like EVOH.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Medium Viscosity
Uses 
  • Film
  • Monofilaments
  • Multilayer Film
Agency Ratings 
 
Processing Method 
  • Blown Film
  • Coextrusion
  • Film Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Apparent Density
g/cm³
  
Water Absorption
      
Saturation, 73°F
%
  
Equilibrium, 73°F, 50% RH
%
  
Viscosity Number
cm³/g
 ISO 307
Moisture Content
%
 ISO 15512
Thermal
Nominal Value
Unit
Test Method
Melting Temperature (DSC)
°F
 ISO 3146
Additional Information
Nominal Value
Unit
Test Method
Extractables 2
%
 ISO 6427
Film Grade
 
 Internal Method
Pellet Shape
 
  
Pellet Size
mil
  
Relative Viscosity 3
 
 ISO 307
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultramid® C 33, Ultramid C 33, Ultramid® C , Ultramid C, UltramidC33, UltramidC, C 33, C33, 33, Polyamide 66/6 Copolymer, Polyamide 666 Copolymer, Polyamide 66:6 Copolymer, Polyamide 66+6 Copolymer, Polyamide 66-6 Copolymer, Polyamide 66_6 Copolymer, Polyamide 66 6 Copolymer, Nylon 66/6, Nylon 666, Nylon 66:6, Nylon 66+6, Nylon 66-6, Nylon 66_6, Nylon 66 6, Polyamide, Nylon, pa666, BASF, Polyamide666Copolymer, Nylon666, Polyamide66_6Copolymer, Nylon66_6, 33C
Generic Name
Generic Name may also be described by the following terms: PA666, PA66/6.
Features
Features may also be described by the following terms: Medium Viscosity.
Uses
Uses may also be described by the following terms: Multilayer Film, Multi-layer Film, Monofilaments, Monofilament.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), EU (1).
Notes
1Typical properties: these are not to be construed as specifications.
2Chips not ground, 16 hr
31% [m/v] in 96% [m/m] sulfuric acid
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.