IDES Prospector Already have an account? Login Here

IDES

SARANEX™ 456

Barrier Film

Supplied by The Dow Chemical Company

The technical datasheet with complete property values for SARANEX™ 456 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SARANEX™ 456 Clear Coextruded Barrier Film is a multilayer film designed for use in packaging, converting and industrial liner applications.

General Characteristics:
  • Excellent barrier to oxygen, water vapor, flavors and aromas
  • Good clarity
  • Heat sealable
  • Complies with U. S. FDA requirements for food contact applications
  • Contact your Dow representative for more information on food contact compliance

  • Available widths: 18 to 40 inches or 54 to 80 inches (457 to 1016 mm or 1372 to 2032 mm)
  • Available core sizes: 3 or 6 inch cores (76 or 152 mm)
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Agency Ratings 
Forms 
  • Film
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction (vs. Itself - Dynamic)
 
 Internal Method
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Tensile Strength
     ASTM D882
MD: Break, 6.0 mil
psi
  
TD: Break, 6.0 mil
psi
  
Tensile Elongation
     ASTM D882
MD: Break, 6.0 mil
%
  
TD: Break, 6.0 mil
%
  
Oxygen Transmission Rate (73°F, 6.0 mil, 50% RH)
cm³/100 in²/24 hr
 ASTM D3985
Water Vapor Transmission Rate (100°F, 6.0 mil, 90% RH)
g/100 in²/24 hr
 ASTM F1249
Yield (6.0 mil)
in²/lb
 ASTM D4321
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SARANEX™ 456, SARANEX 456, SARANEX™ , SARANEX, SARANEX456, 456, Polyvinylidene Chloride, PVDC, Polyvinyl Chloride, PVC, Dow, PolyvinylideneChloride, PolyvinylChloride
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.