SABIC® Vestolen A RELY 5924R 10000 SABIC Polyethylene, High Density

Product Description

SABIC® Vestolen A RELY 5924R 10000 is a grade which has a high density and a bimodal distribution of the molecular mass.
Due to a superior low sagging behaviour of this material it is particularly suitable for the production of thick walled (large diameter and low SDR) pipes and shows excellent processing behaviour.
This material offers security when used for gas and drinking water piping. The material has a high resistance to long-term loading and a high resistance to rapid crack propagation. Owing to a special stabilisation package, good organoleptic properties are ensured with grade RELY 5924R 10000. This material meets (inter)national standards
for use in gas, drinking water and waste water piping.
MRS class ISO 12162 MPa = 10.0 (PE 100).

The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.

General

Material Status

Commercial: Active

Availability

Europe

Additive

Carbon Black (2%)

Features

Bimodal Molecular Weight Distribution

Good Crack Resistance

Good Organoleptic Properties

High Density

Uses

Piping

Appearance

Black

Processing Method

Pipe Extrusion

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR)			ISO 1133
190°C/2.16 kg		g/10 min
190°C/5.0 kg		g/10 min
Carbon Black Content		%	ISO 6964
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (Compression Molded)		psi	ISO 527-2/1BA/2
Tensile Stress (Yield, 0.0787 in, Compression Molded)		psi	ISO 527-2/1BA/50
Tensile Strain (Yield, 0.0787 in, Compression Molded)		%	ISO 527-2/1BA/50
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength
-22°F, Compression Molded		ft·lb/in²	ISO 179/1fA
73°F, Compression Molded		ft·lb/in²	ISO 179/1eA
Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D, Compression Molded)			ISO 868
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Vicat Softening Temperature		°F	ISO 306/B
Melting Temperature (DSC)		°F	DIN 53765
Oxidation Induction Time (410°F)		min	ISO 11357-6
Additional Information	Nominal Value	Unit	Test Method
MRS Classification		psi	ISO 12162
RAL Number
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® Vestolen A RELY 5924R 10000, SABIC Vestolen A RELY 5924R 10000, SABIC® Vestolen A , SABIC Vestolen A, SABICVestolenARELY5924R10000, SABICVestolenA, ARELY 5924 R 10000, ARELY 5924R 10000, ARELY5924, RELY 5924 R 10000, ARELY5924R10000, RELY 5924R 10000, RELY5924, 5924R, R10000, RELY5924R10000, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, SABIC, PolyethyleneHighDensity, 5924RELY, 5924ARELY
Features
Features may also be described by the following terms: Good Crack Resistance, Crack Resistant, High Density, High Specific Gravity, Bimodal, Bimodal Molecular Weight Distribution, Bimodal MW Distribution, Good Organoleptic Properties.
Uses
Uses may also be described by the following terms: Piping, Pipe.

Notes

¹Typical properties: these are not to be construed as specifications.

SABIC® Vestolen A RELY 5924R 10000

High Density Polyethylene

Supplied by Saudi Basic Industries Corporation (SABIC)