IDES Prospector Already have an account? Login Here

IDES

INEOS LDPE 24W930

Low Density Polyethylene

Supplied by INEOS Olefins & Polymers Europe

The technical datasheet with complete property values for INEOS LDPE 24W930 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
24W930 is a low-density polyethylene intended for injection rnoulding and compounding. It is a high MFR material, having good flow properties and allowing short cycle tirne. The moulded article is characterised by low degree of built-in stress, good stiffness and high gloss.

24W930 is recommended for injection moulding of flexible products which require good flow properties and short cycle time. The material is especially suitable for thin walled products like caps and closures, household goods and toys.
It is also recommended for the manufacturing of highly filled compounds.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Antistatic
Features 
  • Fast Molding Cycle
  • High Flow
  
Uses 
  • Caps
  • Closures
  • Compounding
  • Household Goods
  • Thin-walled Parts
  • Toys
RoHS Compliance 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F, 0.157 in, Compression Molded)
psi
 ISO 527-2
Tensile Stress
     ISO 527-2
Yield, 0.157 in, Compression Molded
psi
  
Break, 0.157 in, Compression Molded
psi
  
Tensile Strain (Break, 0.157 in, Compression Molded)
%
 ISO 527-2
Flexural Modulus (73°F, 0.157 in, Compression Molded)
psi
 ISO 178
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, 0.157 in, Compression Molded)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/A
Melting Temperature (DSC) 2
°F
 Internal Method
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INEOS LDPE 24W930, INEOS LDPE , INEOSLDPE24W930, INEOSLDPE, LDPE 24 W 930, LDPE24W930, LDPE24, LDPE, 24 W 930, 24W930, 24W, W930, Polyethylene, Low Density, Polyethylene Low Density, Polyethylene, PE, Ineos Polyolefins, PolyethyleneLowDensity, W24, 24LDPE
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle.
Uses
Uses may also be described by the following terms: Compounding, Compounds, Closure Caps, Caps, Cap, Household Goods, Housewares, Thin-walled Parts, Thin Walled Parts, Thin-wall Parts, Thin wall Parts, Thinwall Parts.
Notes
1Typical properties: these are not to be construed as specifications.
210°C/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.