IDES Prospector Already have an account? Login Here

IDES

Halene P M212S

Polypropylene Random Copolymer

Supplied by Haldia Petrochemicals Ltd.

The technical datasheet with complete property values for Halene P M212S is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
M212S is a Polypropylene Random Copolymer; produced by latest generation Spheripol II Technology. This grade is suitable for manufacture of high clarity Injection Molded & Injection Stretch Blow Molded (ISBM) products.
M212S combines excellent processability with high Flow, low Cycle Time, excellent Clarity, Gloss and Stiffness - Impact balance.
M212S is suitable for Food Contact and Medical applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Fast Molding Cycle
  • Food Contact Acceptable
  • Good Impact Resistance
  • Good Processability
  • Good Stiffness
  • High Clarity
  • High Flow
  • High Gloss
  • Random Copolymer
Uses 
  • Bottles
  • Containers
  • Household Goods
  • Labware
  • Medical/Healthcare Applications
Processing Method 
  • Injection Molding
  • Injection Stretch Blow Molding
  
Physical
Nominal Value
Unit
Test Method
Density 2
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 3, 4 (Yield, Injection Molded)
psi
 ASTM D638
Tensile Elongation 3, 4 (Yield, Injection Molded)
%
 ASTM D638
Flexural Modulus (Injection Molded)
psi
 ASTM D790A
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, Injection Molded)
ft·lb/in
 ASTM D256A
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525 5
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Halene P M212S, Halene P , HalenePM212S, HaleneP, PM 212 S, PM212S, PM212, M 212 S, M212S, M212, 212S, Polypropylene Random Copolymer, PP Random Copolymer, Polypropylene, PP, Haldia Petrochem, PolypropyleneRandomCopolymer, PPRandomCopolymer, 212M, 212PM
Features
Features may also be described by the following terms: Random Copolymer, High Clarity, High Flow, High Melt, High MFI, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, Good Processability, Easy Processing, High Gloss, Good Impact Resistance, Good Stiffness.
Uses
Uses may also be described by the following terms: Medical Applications, Household Goods, Housewares.
Injection
Nominal Value
Unit
 
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
223°C
3Type I, 2.0 in/min
4with Extensometer
5Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.