IDES Prospector Already have an account? Login Here

IDES

Tecnoflon® FOR 3390

Fluoroelastomer

Supplied by Solvay Specialty Polymers

The technical datasheet with complete property values for Tecnoflon® FOR 3390 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
TECNOFLON® FOR 3390 is a medium viscosity cure incorporated fluoroelastomer terpolymer (FKM) with high fluorine content (70 % wt). Tecnoflon® FOR 3390 is designed for applications requiring outstanding fuel and chemical resistance.

Some of the basic properties of Tecnoflon® FOR 3390 are:
  • Good scorch safety
  • Reduced mold fouling
  • Excellent mold release
  • Excellent resistance to fuels
  • Very good heat resistance
  • Very good compression set

TECNOFLON® FOR 3390 can be used for compression, injection and transfer moulding of shaft seals, valve stem seals, gaskets or any item requiring excellent chemical resistance. This material can be combined with the cure system and other typical fluoroelastomers compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers.
TECNOFLON® FOR 3390 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Fuel Resistant
  • Good Chemical Resistance
  • Good Mold Release
  • High Heat Resistance
  • Low Compression Set
  • Medium Viscosity
  • Terpolymer
Uses 
  • Belts/Belt Repair
  • Blending
  • Gaskets
  • Hose
  • Profiles
  • Seals
  • Sheet
Appearance 
  • Off-White
Forms 
  • Slab
Processing Method 
  • Calendering
  • Compounding
  • Compression Molding
  • Extrusion
  • Injection Molding
  • Resin Transfer Molding
Physical
Nominal Value
Unit
 
Mooney Viscosity 2 (ML 1+10, 250°F)
MU
  
Fluorine Content 2
%
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Tecnoflon® FOR 3390, Tecnoflon FOR 3390, Tecnoflon® , Tecnoflon, TecnoflonFOR3390, FOR 3390, FOR3390, Fluoroelastomer, Fluorelastomer, Fluoropolymer, Solvay Specialty, 3390FOR
Features
Features may also be described by the following terms: Good Mold Release, Easy Release, Good Demolding, Medium Viscosity, High Heat Resistance, Low Compression Set, Good Chemical Resistance, Chemical Resistant.
Uses
Uses may also be described by the following terms: Gaskets, Gasketing, Belts/Belt Repair, Belt Repair.
Notes
1Typical properties: these are not to be construed as specifications.
2Raw polymer
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.