IDES Prospector Already have an account? Login Here

IDES

HAIPLEN EP50 X2

Polypropylene Copolymer

Supplied by Taro Plast S.p.A.

The technical datasheet with complete property values for HAIPLEN EP50 X2 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Flame Retardant
Features 
  • Copolymer
  • Flame Retardant
  • Medium Flow
Appearance 
  • Colors Available
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ISO 1133
Molding Shrinkage
    Internal Method
Across Flow
%
 
Flow
%
 
Water Absorption (73°F, 24 hr)
%
ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
ISO 527-2/50
Tensile Strain (Break)
%
ISO 527-2/50
Flexural Modulus 2
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
    ASTM D256
-9°F
ft·lb/in
 
32°F
ft·lb/in
 
73°F
ft·lb/in
 
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
     
66 psi, Unannealed
°F
ISO 75-2/B
264 psi, Unannealed
°F
ISO 75-2/A
Vicat Softening Temperature
     
--
°F
ISO 306/A50
--
°F
ISO 306/B50
Electrical
Nominal Value
Unit
Test Method
Comparative Tracking Index (Solution A)
V
IEC 60112
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
    UL 94
0.0630 in
 
 
0.126 in
 
 
Glow Wire Flammability Index (0.0787 in)
°F
IEC 60695-2-12
Oxygen Index
%
ASTM D2863
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: HAIPLEN EP50 X2, HAIPLEN , HAIPLENEP50X2, EP 50 X 2, EP50 X2, EP50, 50X, X2, EP50X2, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, Taro Plast, PolypropyleneCopolymer, PPCopolymer, 50EP
Features
Features may also be described by the following terms: Medium Flow, Medium Melt, Medium MFI.
Injection
Nominal Value
Unit
 
Drying Temperature - Pre-heater
°F
 
Drying Time - Pre-heater
hr
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Injection Rate
 
 
Notes
1Typical properties: these are not to be construed as specifications.
20.039 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.