IDES Prospector Already have an account? Login Here

IDES

Capran Medallion® MT-2500

Polyamide 6

Supplied by Honeywell

The technical datasheet with complete property values for Capran Medallion® MT-2500 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
CAPRAN MEDALLION® MT2500 is a 1.00 mil (25 micron) biaxially oriented nylon 6 film with a metallized barrier coating well suited for high barrier packaging applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • High Gloss
  • High Strength
  
Uses 
  • Bi-axially Oriented Film
  • Packaging
  
Forms 
  • Film
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction
     ASTM D1894
vs. Itself - Dynamic
 
  
vs. Metal - Dynamic
 
  
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Secant Modulus
     ASTM D882
MD: 1.0 mil
psi
  
TD: 1.0 mil
psi
  
Tensile Strength
     ASTM D882
MD: Break, 1.0 mil
psi
  
TD: Break, 1.0 mil
psi
  
Tensile Elongation
     ASTM D882
MD: Break, 1.0 mil
%
  
TD: Break, 1.0 mil
%
  
Oxygen Permeability (73°F, 1.0 mil)
cm³·mil/100in²/atm/24 hr
 ASTM D3985
Water Vapor Transmission Rate (100°F, 0.98 mil, 100% RH)
g·mil/100in²/atm/24 hr
 ASTM F1249
Additional Information
Yield: 23964 in²/lb
Tensile Strength @ Break, ASTM D 882, MD: 35000 to 45000 psi
Tensile Strength @ Break, ASTM D 882, TD: 45000 to 55000 psi
Elongation @ Break, ASTM 882, MD: 90 to 110%
Elongation @ Break, ASTM 882, TD: 70 to 90%
Secant Modulus, ASTM D 882, MD: 400000 to 500000 psi
Secant Modulus, ASTM D 882, TD: 320000 to 420000 psi
Graves Tear (initial), ASTM D 1004, MD: 1000 to1400 g/mil
Graves Tear (initial), ASTM D 1004, TD: 1000 to1500 g/mil
Coefficient of Friction, ASTM D 1894: 0.40 to 0.60 vs Itself-Dynamic
Coefficient of Friction, ASTM D 1894: 0.13 to 0.24 vs Metal-Dynamic
Helium Transmission Rate, ASTM D 1434, 73°F/0%RH: <6 cc/100in²/day
Surface Tension, ASTM D5946, untreated side: 48 to 50 dynes/cm
Dimensional Stability, ASTM D1204, MD, 320°F, 5min: 1.5 to 2.5% shrinkage
Dimensional Stability, ASTM D1204, TD, 320°F, 5min: 1.0 to 2.0% shrinkage
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Capran Medallion® MT-2500, Capran Medallion MT2500, Capran Medallion® , Capran Medallion, CapranMedallionMT2500, CapranMedallion, MT, MT-2500, MT2500, MT:2500, MT/2500, MT+2500, MT_2500, MT 2500, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Honeywell, Polyamide6, Nylon6, 2500MT
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: High Gloss, High Strength.
Uses
Uses may also be described by the following terms: Bi-axially Oriented Film, Biaxially Oriented Film.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.