IDES Prospector Already have an account? Login Here

IDES

OxyShield® 1545

Polyamide 6

Supplied by Honeywell

The technical datasheet with complete property values for OxyShield® 1545 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Oxyshield®1545 is a 0.59 mil (15 micron) biaxially oriented nylon 6 film coated on one side with PVdC. The coating is applied without the need for a primer layer and so presents superior coating adhesion and laminating adhesion to other films. Medium oxygen and moisture vapor barrier and superior clarity are properties well suited for packaging applications requiring excellent mechanical strength and long shelf life.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • High Clarity
  • High Gloss
  • High Strength
Uses 
  • Bi-axially Oriented Film
  • Packaging
  
Forms 
  • Film
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction
     ASTM D1894
vs. Itself - Dynamic
 
  
vs. Itself - Static
 
  
vs. Metal - Dynamic, Extrusion Coating
 
  
vs. Metal - Dynamic
 
  
vs. Metal - Static, Extrusion Coating
 
  
vs. Metal - Static
 
  
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Secant Modulus
     ASTM D882
MD: 0.59 mil
psi
  
TD: 0.59 mil
psi
  
Tensile Strength
     ASTM D882
MD: Break, 0.59 mil
psi
  
TD: Break, 0.59 mil
psi
  
Tensile Elongation
     ASTM D882
MD: Break, 0.59 mil
%
  
TD: Break, 0.59 mil
%
  
Oxygen Permeability (73°F, 0.59 mil, 65% RH)
cm³·mil/100in²/atm/24 hr
 ASTM D3985
Water Vapor Transmission Rate (100°F, 0.59 mil, 100% RH)
g·mil/100in²/atm/24 hr
 ASTM F1249
Optical
Nominal Value
Unit
Test Method
Haze (0.590 mil)
%
 ASTM D1003
Additional Information
Yield: 40800 in²/lb
Tensile Strength @ Break, ASTM D 882, MD: 34000 to 38000 psi
Tensile Strength @ Break, ASTM D 882, TD: 34000 to 38000 psi
Elongation @ Break, ASTM 882, MD: 75 to 100%
Elongation @ Break, ASTM 882, TD: 75 to 100%
Secant Modulus, ASTM D 882, MD: 300000 to 375000 psi
Secant Modulus, ASTM D 882, TD: 275000 to 350000 psi
Graves Tear (initial), ASTM D 1004, MD: 1100 to1400 g/mil
Graves Tear (initial), ASTM D 1004, TD: 1100 to1400 g/mil
Coefficient of Friction, ASTM D 1894: 0.6 to 0.7 vs Itself-Dynamic
Coefficient of Friction, ASTM D 1894: 0.9 to 1.3 vs Itself-Static
Coefficient of Friction, ASTM D 1894: 0.2 to 0.4 vs Metal-Dynamic
Coefficient of Friction, ASTM D 1894: 0.3 to 0.5 vs Metal-Static
Coefficient of Friction, ASTM D 1894, Extrusion Coated: 0.4 to 0.7 vs Metal-Dynamic
Coefficient of Friction, ASTM D 1894, Extrusion Coated: 0.8 to 1.8 vs Metal-Static
Dimensional Stability, ASTM D1204, MD, 320°F, 5min: < 2.5% shrinkage
Dimensional Stability, ASTM D1204, TD, 320°F, 5min: <1.5% shrinkage
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: OxyShield® 1545, OxyShield 1545, OxyShield® , OxyShield, OxyShield1545, 1545, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Honeywell, Polyamide6, Nylon6
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: High Gloss, High Strength, High Clarity.
Uses
Uses may also be described by the following terms: Bi-axially Oriented Film, Biaxially Oriented Film.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.