IDES Prospector Already have an account? Login Here

IDES

OxyShield® 2545

Polyamide 6

Supplied by Honeywell

The technical datasheet with complete property values for OxyShield® 2545 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • High Gloss
  • High Strength
  
Uses 
  • Bi-axially Oriented Film
  • Packaging
  
Forms 
  • Film
Physical
Nominal Value
Unit
Test Method
Molding Shrinkage
     ASTM D955
Flow
in/in
  
Across Flow
in/in
  
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction
     ASTM D1894
vs. Itself - Dynamic
 
  
vs. Metal - Dynamic
 
  
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Secant Modulus
     ASTM D882
MD
psi
  
TD
psi
  
Tensile Strength
     ASTM D882
MD: Break
psi
  
TD: Break
psi
  
Tensile Elongation
     ASTM D882
MD: Break
%
  
TD: Break
%
  
Elmendorf Tear Strength
     ASTM D1922
MD
g
  
TD
g
  
Oxygen Permeability (73°F, 65% RH)
cm³·mil/100in²/atm/24 hr
 ASTM D3985
Water Vapor Transmission
g/100 in²/24 hr
 ASTM E96
Optical
Nominal Value
Unit
Test Method
Gloss (20°)
 
 ASTM D2457
Haze
%
 ASTM D1003
Additional Information
Tensile Strength @ Break, ASTM D 882, MD & TD: 30000 - 42000 psi
Elongation @ Break, ASTM 882, MD & TD: 70 - 110%
Secant Modulus, ASTM D 882, MD & TD: 350000 - 475000 psi
Elmendorf Tear Str, ASTM D 1922, MD & TD: 15 - 19 g/mil
Graves Tear (initial), ASTM D 1004: 1100 - 1400 g/mil
Gloss (20°), ASTM D 2457: 75 - 85
Coefficient of Friction, ASTM D 1894: 0.65 - 0.90 vs Itself-Dynamic
Coefficient of Friction, ASTM D 1894: 0.24 - 0.30 vs Metal-Dynamic
Oxygen Permeability, ASTM D 3985, 73°F/0% RH: .52 cc/100 in²/day


The value listed as Mold Shrink, Linear-Flow, ASTM D 955, was tested in accordance with ASTM D 1204.
The value listed as Mold Shrink, Linear-Trans, ASTM D 955, was tested in accordance with ASTM D 1204.
The value listed as Water Vapor Transmission , ASTM E 96, was tested in accordance with ASTM F 1249.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: OxyShield® 2545, OxyShield 2545, OxyShield® , OxyShield, OxyShield2545, 2545, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Honeywell, Polyamide6, Nylon6
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: High Gloss, High Strength.
Uses
Uses may also be described by the following terms: Bi-axially Oriented Film, Biaxially Oriented Film.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.