IDES Prospector Already have an account? Login Here

IDES

POLYLAC® PA-709S

Acrylonitrile Butadiene Styrene

Supplied by CHI MEI CORPORATION

The technical datasheet with complete property values for POLYLAC® PA-709S is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Features 
  • High Impact Resistance
Uses 
  • Sheet
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)
g/10 min
 ASTM D1238
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg)
in³/10min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
      
Yield, 0.125 in 2
psi
 ASTM D638
Yield
psi
 ISO 527-2/50
Break
psi
 ISO 527-2/50
Tensile Elongation
      
Break, 0.125 in 2
%
 ASTM D638
Break
%
 ISO 527-2/50
Flexural Modulus
      
0.250 in 3
psi
 ASTM D790
-- 4
psi
 ISO 178
Flexural Strength
      
0.250 in 3
psi
 ASTM D790
-- 4
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179
Notched Izod Impact
      
73°F, 0.125 in
ft·lb/in
 ASTM D256
73°F, 0.250 in
ft·lb/in
 ASTM D256
--
ft·lb/in²
 ISO 180/1A
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale, 0.500 in)
 
 ASTM D785
Ball Indentation Hardness
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
264 psi, Unannealed, 0.250 in
°F
 ASTM D648
264 psi, Unannealed
°F
 ISO 75-2/A
264 psi, Annealed, 0.250 in
°F
 ASTM D648
264 psi, Annealed
°F
 ISO 75-2/A
Vicat Softening Temperature
      
--
°F
 ASTM D1525 5, ISO 306/A120 5
--
°F
 ISO 306/A50
--
°F
 ISO 306/B50
--
°F
 ISO 306/B120
Electrical
Nominal Value
Unit
Test Method
Arc Resistance (PLC)
 
 ASTM D495
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0591 in, All colors
 
  
0.0626 in
 
  
0.118 in
 
  
UL File Number
 
  
UL
Nominal Value
Unit
Test Method
RTI Str
     UL 746
0.0591 in
°F
  
0.118 in
°F
  
RTI Imp
     UL 746
0.0591 in
°F
  
0.118 in
°F
  
RTI Elec
     UL 746
0.0591 in
°F
  
0.118 in
°F
  
Comparative Tracking Index (CTI) (PLC)
 
 UL 746
High Voltage Arc Tracking Rate (HVTR) (PLC)
 
 UL 746
Hot-wire Ignition (HWI) (PLC)
     UL 746
0.0591 in
 
  
0.118 in
 
  
High Amp Arc Ignition (HAI) (PLC)
     UL 746
0.0591 in
 
  
0.118 in
 
  
Additional Information
Impact Flexural Test, ISO 179/2C, Notched: 20 kJ/m²
Related Terminology
This supplier and product may also be known by these terms: ChiMei

Product names can be difficult to match. You may have searched any one of these terms to find this product: POLYLAC® PA-709S, POLYLAC PA709S, POLYLAC® , POLYLAC, POLYLACPA709S, PA, PA 709 S, PA-709S, PA709S, PA:709S, PA/709S, PA+709S, PA_709S, PA 709S, PA709, 709S, Acrylonitrile Butadiene Styrene, ABS, Chi Mei, AcrylonitrileButadieneStyrene, 709PA
Features
Features may also be described by the following terms: High Impact Resistance.
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Die Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
20.24 in/min
30.11 in/min
40.079 in/min
5Rate A (50°C/h)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.