IDES Prospector Already have an account? Login Here

IDES

WPP PE PE-47MF-1

High Density Polyethylene

Mica Filler, 10%

Supplied by Washington Penn Plastic Co. Inc.

The technical datasheet with complete property values for WPP PE PE-47MF-1 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Mica Filler, 10% Filler by Weight
Uses 
  • Electronic Data Processing
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength (Yield)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
73°F, 0.125 in
ft·lb/in
  
73°F, 0.500 in
ft·lb/in
  
Unnotched Izod Impact
     ASTM D256
73°F, 0.125 in
ft·lb/in
  
73°F, 0.250 in
ft·lb/in
  
Gardner Impact (73°F)
in·lb
 ASTM D3029
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness
     ASTM D2240
Shore A
 
  
Shore D
 
  
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0580 in)
 
 UL 94
UL
Nominal Value
Unit
Test Method
RTI Str (0.0580 in)
°F
 UL 746
RTI Imp (0.0580 in)
°F
 UL 746
RTI Elec (0.0580 in)
°F
 UL 746
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: WPP PE PE-47MF-1, WPP PE PE47MF1, WPP PE , WPPPEPE47MF1, WPPPE, PEPE 47 MF 1, PE, PEPE-47MF-1, PEPE47MF1, PEPE:47MF:1, PEPE/47MF/1, PEPE+47MF+1, PEPE_47MF_1, PEPE 47MF 1, PEPE47, PEPE, PE 47 MF 1, PE-47MF-1, PE47MF1, PE:47MF:1, PE/47MF/1, PE+47MF+1, PE_47MF_1, PE 47MF 1, PE47, 47MF, MF1, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, Washington Penn, PolyethyleneHighDensity, 47PE, 47PEPE
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.