IDES Prospector Already have an account? Login Here

IDES

CALIBRE™ 2061-10

Polycarbonate Resin

Supplied by Styron LLC

The technical datasheet with complete property values for CALIBRE™ 2061-10 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
CALIBRE™ 2061-10 resin is suitable for steam and ethylene oxide sterilization required by the health care industry. CALIBRE 2061-10 provides exceptional clarity, heat resistance, impact strength, processability, and has low contamination levels. CALIBRE 2061-10 resin is compliant with ISO 10993 (Biological Evaluation of Medical Devices) and is suitable for use in approved medical applications. This product contains mold release.

Main Characteristics:
  • ISO 10993

Applications:
  • Medical applications
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Mold Release
Agency Ratings 
  •  1
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183/A
Melt Mass-Flow Rate (MFR) (300°C/1.2 kg)
g/10 min
ISO 1133
Molding Shrinkage - Flow
%
ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2/50
Tensile Stress
    ISO 527-2/50
Yield
psi
 
Break
psi
 
Tensile Strain
    ISO 527-2/50
Yield
%
 
Break
%
 
Flexural Modulus 3, 4
psi
ISO 178
Flexural Strength 3, 4
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength (73°F)
ft·lb/in²
ISO 180/A
Unnotched Izod Impact Strength (73°F)
 
ISO 180
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
     
66 psi, Annealed
°F
ISO 75-2/B
264 psi, Unannealed
°F
ISO 75-2/A
264 psi, Annealed
°F
ISO 75-2/A
Vicat Softening Temperature
°F
ISO 306/B50
Optical
Nominal Value
Unit
Test Method
Transmittance
%
ASTM D1003
Haze
%
ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: CALIBRE™ 2061-10, CALIBRE 206110, CALIBRE™ , CALIBRE, CALIBRE206110, 2061, 2061-10, 206110, 2061:10, 2061/10, 2061+10, 2061_10, 2061 10, Polycarbonate, PC, Styron, 102061
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): ISO (1).
Notes
1Biocompatibility testing following ISO Guidelines 10993 has been completed on select classic resins in this series. Please consult Styron for details. ISO guidelines include a sensitization test.
2Typical properties: these are not to be construed as specifications.
30.079 in/min
43-points
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.