IDES Prospector Already have an account? Login Here

IDES

Cevian® SER91X

Acrylonitrile Butadiene Styrene

Supplied by PlastxWorld Inc.

The technical datasheet with complete property values for Cevian® SER91X is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Discontinued
Availability 
  • North America
Features 
  • Flame Retardant
  • Good Moldability
  • Good UV Resistance
  • High Heat Resistance
  
Appearance 
  • Black
  • Colors Available
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/3.8 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength (Yield)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.125 in)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0310 in
 
  
0.0620 in
 
  
0.0984 in
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Cevian® SER91X, Cevian SER91X, Cevian® , Cevian, CevianSER91X, SER 91 X, SER91X, SER91, 91X, Acrylonitrile Butadiene Styrene, ABS, PlastxWorld, AcrylonitrileButadieneStyrene, 91SER
Features
Features may also be described by the following terms: High Heat Resistance, Good Moldability, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Back Pressure
psi
  
Screw Speed
rpm
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.