IDES Prospector Already have an account? Login Here

IDES

Cevian®-V 660SF

Acrylonitrile Butadiene Styrene

Supplied by PlastxWorld Inc.

The technical datasheet with complete property values for Cevian®-V 660SF is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Cevian-V 660SF is a high flow ABS for general purpose applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • General Purpose
  • High Flow
 
Uses 
  • General Purpose
Appearance 
  • Black
  • Colors Available
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/3.8 kg)
g/10 min
ASTM D1238
Molding Shrinkage - Flow (0.125 in)
in/in
ASTM D955
Water Absorption (73°F, 24 hr)
%
ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
ASTM D638
Flexural Modulus
psi
ASTM D790
Flexural Strength (Yield)
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.125 in)
ft·lb/in
ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed, 0.500 in)
°F
ASTM D648
Vicat Softening Temperature
°F
ASTM D1525 2
CLTE - Flow
in/in/°F
ASTM D696
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0620 in, ALL)
 
UL 94
Additional Information
Specific Gravity, ASTM D792, 73°F, 50% RH: 1.05
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Cevian®-V 660SF, CevianV 660SF, Cevian®-V , CevianV, Cevian®:V, Cevian®/V, Cevian®+V, Cevian®_V, Cevian® V, CevianV660SF, Cevian_V, Cevian V, 660 SF, 660SF, Acrylonitrile Butadiene Styrene, ABS, PlastxWorld, AcrylonitrileButadieneStyrene, SF660
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Injection Pressure
psi
 
Injection Rate
 
 
Back Pressure
psi
 
Screw Speed
rpm
 
Notes
1Typical properties: these are not to be construed as specifications.
2Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.