IDES Prospector Already have an account? Login Here

IDES

Cevian®-V 400N

Acrylonitrile Butadiene Styrene

Supplied by PlastxWorld Inc.

The technical datasheet with complete property values for Cevian®-V 400N is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Heat Stabilizer
Features 
  • Good Thermal Stability
  • Heat Stabilized
  • High Heat Resistance
Appearance 
  • Black
  • Colors Available
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
      
230°C/3.8 kg
g/10 min
 ASTM D1238
220°C/10.0 kg
g/10 min
 ISO 1133
Molding Shrinkage
      
Flow: 0.125 in
in/in
 ASTM D955
--
%
 ISO 294-4
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
      
Yield
psi
 ASTM D638
Yield
psi
 ISO 527-2
Flexural Modulus
      
--
psi
 ASTM D790
--
psi
 ISO 178
Flexural Strength
      
--
psi
 ISO 178
Yield
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
      
0.125 in
ft·lb/in
 ASTM D256
73°F
ft·lb/in²
 ISO 180
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ISO 2039-2
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed, 0.500 in)
°F
 ASTM D648
Vicat Softening Temperature
      
--
°F
 ISO 306/A50
--
°F
 ISO 306/B50
--
°F
 ISO 306/B120
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0591 in)
 
 UL 94
Additional Information
The value listed as Mold Shrinkage, ISO 294, was tested in accordance with ISO 2577.
Specific Gravity, ASTM D792, 73°F, 50% RH: 1.05
Water Absorption, ASTM D570, 24 hrs, 73°F: 0.3 %
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Cevian®-V 400N, CevianV 400N, Cevian®-V , CevianV, Cevian®:V, Cevian®/V, Cevian®+V, Cevian®_V, Cevian® V, CevianV400N, Cevian_V, Cevian V, 400 N, 400N, Acrylonitrile Butadiene Styrene, ABS, PlastxWorld, AcrylonitrileButadieneStyrene, N400
Features
Features may also be described by the following terms: High Heat Resistance, Good Thermal Stability, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Rate
 
  
Back Pressure
psi
  
Screw Speed
rpm
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.