IDES Prospector Already have an account? Login Here

IDES

RTV-2 GI-1100

Silicone

Supplied by Silicones, Inc.

The technical datasheet with complete property values for RTV-2 GI-1100 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
GI-1100 is an extremely high tear, high elastic, two-component, tin catalyzed RTV silicone rubber. It is designed for applications where high tear resistance and exceptional elongation are needed.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Chemical Resistance
  • Good Colorability
  • Good Dimensional Stability
  • Good Tear Strength
  • Low Shrinkage
Appearance 
  • Off-White
Forms 
  • Liquid
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow
in/in
 ASTM D955
Elastomers
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D412
Tensile Elongation (Break)
%
 ASTM D412
Tear Strength
lbf/in
 ASTM D624
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Max. Continuous Use Temperature
°F
 ASTM D794
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 ASTM D257
Dielectric Strength
V/mil
 ASTM D149
Dielectric Constant (100 Hz)
 
 ASTM D150
Dissipation Factor (100 Hz)
 
 ASTM D150
Thermoset
Nominal Value
Unit
Test Method
Thermoset Components
      
Hardener
 
  
Resin
 
  
Pot Life
min
  
Shelf Life
wk
  
Thermoset Mix Viscosity
cP
 ASTM D2393
Demold Time
min
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: RTV-2 GI-1100, RTV2 GI1100, RTV-2 , RTV2, RTV:2, RTV/2, RTV+2, RTV_2, RTV 2, RTV2GI1100, GI, GI-1100, GI1100, GI:1100, GI/1100, GI+1100, GI_1100, GI 1100, Silicone, Silicones, 1100GI
Features
Features may also be described by the following terms: Good Chemical Resistance, Chemical Resistant, Good Colorability, Good Dimensional Stability, Dimensionally Stable, Low Shrinkage, Good Tear Strength.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.