IDES Prospector Already have an account? Login Here

IDES

RTV-2 P-50

Silicone

Supplied by Silicones, Inc.

The technical datasheet with complete property values for RTV-2 P-50 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
P-50 has been designed to meet the stringent requirements of casting polyurethane and epoxy molds. It offers exceptional chemical and heat resistance as well as the high tear strength necessary to cast intricate parts. P-50 has very low shrinkage and the high durometer necessary for polyurethane foam and/or self-supporting mold applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Chemical Resistance
  • Good Tear Strength
  • High Heat Resistance
  • Low Shrinkage
  • Low Viscosity
Uses 
  • Molds/Dies/Tools
Appearance 
  • Tan
Forms 
  • Liquid
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Elastomers
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D412
Tensile Elongation (Break)
%
 ASTM D412
Tear Strength
lbf/in
 ASTM D624
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Max. Continuous Use Temperature
°F
 ASTM D794
Thermoset
Nominal Value
Unit
Test Method
Thermoset Components
      
Hardener
 
  
Resin
 
  
Pot Life
min
  
Shelf Life
wk
  
Thermoset Mix Viscosity
cP
 ASTM D2393
Demold Time
min
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: RTV-2 P-50, RTV2 P50, RTV-2 , RTV2, RTV:2, RTV/2, RTV+2, RTV_2, RTV 2, RTV2P50, P-50, P50, P:50, P/50, P+50, P_50, P 50, Silicone, Silicones, 50P
Features
Features may also be described by the following terms: Good Chemical Resistance, Chemical Resistant, High Heat Resistance, Low Shrinkage, Good Tear Strength, Low Viscosity.
Uses
Uses may also be described by the following terms: Molds/Dies/Tools, Molds, Dies, tools.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.