Clariant PBT PBT-1100G30TF15 Clariant Perf Polybutylene Terephthalate (Glass Fiber Reinforcement, 30%)

General

Material Status

Commercial: Active

Availability

North America

Filler / Reinforcement

Glass Fiber Reinforcement, 30% Filler by Weight

Additive

PTFE Lubricant

Features

Good Chemical Resistance

Good Dimensional Stability

Good Toughness

Good Wear Resistance

High Heat Resistance

High Rigidity

High Strength

Low Friction

Lubricated

Uses

Engineering Parts

Agency Ratings

Forms

Pellets

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity			ASTM D792
Molding Shrinkage - Flow (0.125 in)		in/in	ASTM D955
Water Absorption (24 hr)		%	ASTM D570
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength		psi	ASTM D638
Tensile Elongation (Break)		%	ASTM D638
Flexural Modulus		psi	ASTM D790
Flexural Strength		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (0.125 in)		ft·lb/in	ASTM D256
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness			ASTM D785
M-Scale
R-Scale
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
66 psi, Unannealed		°F
264 psi, Unannealed		°F
Melting Temperature		°F
CLTE - Flow		in/in/°F	ASTM D696
Electrical	Nominal Value	Unit	Test Method
Volume Resistivity		ohm·cm	ASTM D257
Dielectric Strength		V/mil	ASTM D149
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0313 in
0.0625 in
0.125 in
0.250 in
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Clariant PBT PBT-1100G30TF15, Clariant PBT PBT1100G30TF15, Clariant PBT , ClariantPBTPBT1100G30TF15, ClariantPBT, PBTPBT 1100 G 30 TF 15, PBT, PBTPBT-1100G30TF15, PBTPBT1100G30TF15, PBTPBT:1100G30TF15, PBTPBT/1100G30TF15, PBTPBT+1100G30TF15, PBTPBT_1100G30TF15, PBTPBT 1100G30TF15, PBTPBT1100, PBTPBT, PBT 1100 G 30 TF 15, PBT-1100G30TF15, PBT1100G30TF15, PBT:1100G30TF15, PBT/1100G30TF15, PBT+1100G30TF15, PBT_1100G30TF15, PBT 1100G30TF15, PBT1100, 1100G, G30, 30TF, TF15, Polybutylene Terephthalate, Polyester, Clariant Perf, PolybutyleneTerephthalate, 1100PBT, 1100PBTPBT
Features
Features may also be described by the following terms: Good Chemical Resistance, Chemical Resistant, Good Dimensional Stability, Dimensionally Stable, Low Friction, High Heat Resistance, High Rigidity, High Strength, Good Toughness, Tough, Good Wear Resistance, Wear Resistant.
Uses
Uses may also be described by the following terms: Engineering Parts.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): UL (1).

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Suggested Max Moisture		%
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Processing (Melt) Temp		°F
Melt Temperature (Aim)		°F
Mold Temperature		°F
Injection Rate
Back Pressure		psi
Screw Speed		rpm
Cushion		in
Injection Notes
Injection Pressure: Use minimum pressure to achieve 95% fill during the boost inj. pressure phase. Hold Pressure: 30% to 75% of injection pressure. Mold Temp. Target: 165°F Screw Speed Target: 50 RPM

Notes

¹Typical properties: these are not to be construed as specifications.

Clariant PBT PBT-1100G30TF15

Polybutylene Terephthalate

Glass Fiber Reinforcement, 30%

Supplied by Clariant Performance Plastics