Clariant Nylon 6 PA-211CF30 TF15 Clariant Perf Polyamide 6 (Carbon Fiber Reinforcement, 30%)

General

Material Status

Commercial: Active

Availability

North America

Filler / Reinforcement

Carbon Fiber Reinforcement, 30% Filler by Weight

Additive

PTFE Lubricant (150000 ppm)

Features

Electrically Conductive

Flame Retardant

Good Chemical Resistance

Good Colorability

Good Corrosion Resistance

Good Dimensional Stability

Good Processability

Good Stiffness

Good Toughness

Good Wear Resistance

High Rigidity

High Strength

Low Friction

Lubricated

Uses

Business Equipment

Medical/Healthcare Applications

Metal Replacement

Military Applications

Sporting Goods

Agency Ratings

Forms

Pellets

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity			ASTM D792
Molding Shrinkage - Flow (0.125 in)		in/in	ASTM D955
Water Absorption (24 hr)		%	ASTM D570
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength		psi	ASTM D638
Tensile Elongation (Break)		%	ASTM D638
Flexural Modulus		psi	ASTM D790
Flexural Strength		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (0.125 in)		ft·lb/in	ASTM D256
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness			ASTM D785
M-Scale
R-Scale
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
66 psi, Unannealed		°F
264 psi, Unannealed		°F
CLTE - Flow		in/in/°F	ASTM D696
Electrical	Nominal Value	Unit	Test Method
Volume Resistivity		ohm·cm	ASTM D257
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Clariant Nylon 6 PA-211CF30 TF15, Clariant Nylon 6 PA211CF30 TF15, Clariant Nylon 6 , ClariantNylon6PA211CF30TF15, ClariantNylon6, 6 PA 211 CF 30 TF 15, 6 PA, PA, 6PA-211CF30 TF15, 6PA211CF30 TF15, 6PA:211CF30 TF15, 6PA/211CF30 TF15, 6PA+211CF30 TF15, 6PA_211CF30 TF15, 6PA 211CF30 TF15, 6PA, PA 211 CF 30 TF 15, 6PA211CF30TF15, PA-211CF30 TF15, PA211CF30 TF15, PA:211CF30 TF15, PA/211CF30 TF15, PA+211CF30 TF15, PA_211CF30 TF15, PA 211CF30 TF15, PA211, 211CF, CF30, 30TF, TF15, 6PA_211CF30TF15, PA211CF30TF15, PA_211CF30TF15, Polyamide 6, Nylon 6, Polyamide, Nylon, Clariant Perf, Polyamide6, Nylon6, 211PA, PA6
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Good Chemical Resistance, Chemical Resistant, Good Colorability, Good Corrosion Resistance, Corrosion Resistant, Good Dimensional Stability, Dimensionally Stable, Low Friction, Good Processability, Easy Processing, High Rigidity, Good Stiffness, High Strength, Good Toughness, Tough, Good Wear Resistance, Wear Resistant, Electrically Conductive, Conducts Electricity, Conductive.
Uses
Uses may also be described by the following terms: Medical Applications, Business Equipment, Business Machines.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): UL (1).

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Suggested Max Moisture		%
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Processing (Melt) Temp		°F
Melt Temperature (Aim)		°F
Mold Temperature		°F
Injection Rate
Back Pressure		psi
Screw Speed		rpm
Cushion		in
Injection Notes
Injection Pressure: Use minimum pressure to achieve 95% fill during the boost inj. pressure phase. Hold Pressure: 30% to 75% of injection pressure. Mold Temp. Target: 180°F Screw Speed Target: 75 RPM

Notes

¹Typical properties: these are not to be construed as specifications.

Clariant Nylon 6 PA-211CF30 TF15

Polyamide 6

Carbon Fiber Reinforcement, 30%

Supplied by Clariant Performance Plastics