IDES Prospector Already have an account? Login Here

IDES

Conathane CE-1155-35

Polyurethane

Supplied by Conap, Inc, a Division of Cytec Industries Inc.

The technical datasheet with complete property values for Conathane CE-1155-35 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
This coating may be applied by dip, spray, or brush and all contain a fluorescent dye to aid in application or subsequent inspection. All coatings yield transparent films. CONAP Dielectric Conformal Coatings are available in gallon, five-gallon, or fifty-five gallon containers or units.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Chemical Resistance
  • Good Flexibility
  • Good Thermal Shock Resistance
  • Solvent Resistant
 
Agency Ratings 
Forms 
  • Pellets
Thermal
Nominal Value
Unit
Test Method
Max. Continuous Use Temperature
°F
ASTM D794
Electrical
Nominal Value
Unit
Test Method
Dielectric Strength
V/mil
ASTM D149
Dielectric Constant
 
ASTM D150
Dissipation Factor (1 MHz)
 
ASTM D150
Thermoset
Nominal Value
Unit
Test Method
Thermoset Components
     
Hardener
 
 
Resin
 
 
Pot Life (77°F)
min
 
Shelf Life
wk
 
Thermoset Mix Viscosity (77°F)
cP
ASTM D2393
Demold Time
     
77°F
min
 
140°F
min
 
Additional Information
Insulation Resistance, Initial, 25°C, 50 % R.H.: 2.5 E13 ohm-cm
Insulation Resistance, During 10th day cycling, 65°C, 95 % R.H.: 6.1 E10 ohm-cm
Insulation Resistance, Recovery 24 hrs after 10th day cycling, 25°C, 50 % R.H.: 6.0 E12 ohm-cm
Operating Temperature Range: -65°C to 130°C
Tack Free Time, 25°C: 4-5 hrs.
% Solids Content: 34 %
Flashpoint: 55°F
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Conathane CE-1155-35, Conathane CE115535, Conathane , ConathaneCE115535, CE, CE-1155-35, CE115535, CE:1155:35, CE/1155/35, CE+1155+35, CE_1155_35, CE 1155 35, CE1155, 115535, Polyurethane, Unspecified, Polyurethane Unspecified, PUR, Unspecified, PUR Unspecified, Polyurethane, PUR, Conap, PolyurethaneUnspecified, PURUnspecified, 1155CE
Features
Features may also be described by the following terms: Good Chemical Resistance, Chemical Resistant, Good Flexibility, Flexible, Good Thermal Shock Resistance, Thermal Shock Resistant.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): MIL (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.